Table of Contents
Advertisement
Quick Links
CONVERSION INSTRUCTIONS
Propane Gas to Natural Gas Conversion Kit
For Thermador Professional
Model STARNGKIT Part No. 35-00-679
This kit is used to convert only Professional Model PCS Professional
and Model PRDS Professional
This kit cannot be used to convert older Thermador Professional
ranges, nor any other brand of appliance.
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.
MODEL GP24WK AND PCS484WK WOK COOKTOPS REQUIRE A SEPARATE KIT
TO CONVERT THE WOK. ORDER WOKNGKIT, PART NUMBER 35-00-611.
COMPLETE THIS CONVERSION PRIOR TO INSTALLING APPLIANCE.
IMPORTANT: Only a qualified service technician or installer should make this conversion.
INSTALLER: Please leave these Conversion Instructions with this unit for the owner.
OWNER: Please retain these instructions for future reference.
Contains 7mm Hex Main Orifices
®
ranges from propane gas to natural gas operation.
WARNING: Disconnect gas and electric power
before making conversion. Before turning power ON,
be sure that all controls are in the OFF position.
®
Cooktops and Ranges
®
Cooktops
®
cooktops or
Advertisement
Table of Contents
Related Manuals for Thermador STARNGKIT
Summary of Contents for Thermador STARNGKIT
- Page 1 ® and Model PRDS Professional ranges from propane gas to natural gas operation. ® This kit cannot be used to convert older Thermador Professional cooktops or ranges, nor any other brand of appliance. PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING. MODEL GP24WK AND PCS484WK WOK COOKTOPS REQUIRE A SEPARATE KIT TO CONVERT THE WOK.
- Page 2 Tools/ Parts Required: TABLE 1: Natural Gas Conversion Kit Contents • Socket Driver - 1/4" Drive, Description Part Number Ouantity 3"minimum extension • 1/2" Open end Wrench Instructions, Natural Gas Conversion 15-13-106 • Screwdriver #168 Natural Gas Orifice, Surface Burner 15-12-591-01 •...
- Page 3 FIGURE 1 Cap Position for Natural Gas PROCEDURE TO CONVERT FROM PROPANE GAS TO NATURAL GAS FOLLOW STEPS 1 AND 2 FOR ALL COOKTOPS AND RANGES, THEN FOLLOW ADDITIONAL STEPS AS IDENTIFIED IN TABLE 2 FOR THE PARTICULAR MODEL BEING CONVERTED. STEP I: TURN OFF GAS AND ELECTRICITY If the appliance is in- stalled: Shut off the gas valve to the appliance and remove appliance...
- Page 4 FIGURE 2 Burner Cap Flame Spreader Burner Base Star Grate (Top View) FIGURE 6 The burner flame should be blue in color and stable with no exces- sive noise or sputtering. It should STEP 3: CONVERT SURFACE BURNERS (ALL MODELS) burn completely around the burner cap.
- Page 5 FIGURE 8 Insert guage, gently screw orifice hood down GUAGE against guage. GUAGE © Safety Valve Unscrew orifice hood from LP Position STEP 4: CONVERT GRILL (MODEL NOS. PCS364GL, PCS484GG, PCS486GL, PRDS364GL, PRDS484GG, and PRDS486GL). REMOVE the grill grate, briquette pan, ceramic briquettes and the U-shaped burner. (Use extreme caution around the ceramic grill ignitor, it is very fragile).
- Page 6 Thermador reserves the right to change specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products which are transported from the United States for use in Canada. Check with your local Canadian distributor or dealer. Thermador, 5551 McFadden Avenue, Huntington Beach, CA 92649.
Need help?
Do you have a question about the STARNGKIT and is the answer not in the manual?
Questions and answers