Related Manuals for FS FFOI-605
Summary of Contents for FS FFOI-605
- Page 1 Hand-held Fiber Microscope Displays Power FFOI-605 250X FIBER OPTIC INSPECTION PROBE MICROSCOPE Quick Start Guide V1.0...
- Page 2 Introduction The FFOI-605 250X fiber optic inspection probe microscope is a portable, video microscope used to inspect fiber optic terminations. More specifically, it is used to inspect hard-to-reach connectors that are installed on the "backside" of patch panels or inside hardware devices. It eliminates the need to access the backside of patch panels or disassemble hardware devices prior to inspection.
- Page 3 Adapter Type Description 25-U-M FC/SC/ST/LSH patch cord UPC termination (2.5mm UPC Male) 125-U-M LC/MU patch cord UPC termination (1.25mm UPC Male) 25-A-M FC/SC/ST/LSH patch cord APC termination (2.5mm APC Male) 125-A-M LC/MU patch cord APC termination (1.25mm APC Male) FC-PC-F FC UPC bulkhead (FC UPC Female) SC-PC-F...
- Page 4 4-pin Connector Power Connector Brightness Control Focus Control Coil Cable Barrel Assembly Hand Knob Installing 1. Locate tip you want to install and look at the threaded end. This screw acts as a "key" and is already mounded with the key channel. Do not try to screw the key channel off from the threaded key, which might destroy the whole probe.
- Page 5 Operation Instructions 1. Using the LCD display with probe connect the probe to the display. Step 1: Connect the cable from the probe to the monitor using the 4-pin connector on the bottom of the monitor. Step 2: Connect the AC power adapter/charger if necessary.
- Page 6 Refers to a potential product hazard, it requires a procedure which, if not correctly followed, may result in component damage. Do not proceed unless you understand and meet the required conditions. Online Resources Download https://www.fs.com/download.html Help Center https://www.fs.com/service/help_center.html https://www.fs.com/contact_us.html Contact Us...
- Page 7 Product Warranty FS ensures our customers that any damage or faulty items due to our workmanship, we will offer a free return within 30 Days from the day you receive your goods. Warranty: All Fiber Optic Inspections enjoy 1 year limited warranty against defect in materials or workmanship.
Need help?
Do you have a question about the FFOI-605 and is the answer not in the manual?
Questions and answers