RedRover: English Audio Software Remote Control User’s Guide: First Edition If you have any problems or questions on this product, please call : Technical Support - 562.926.4338 North America Support Hours: Mon-Fri: 8am - 5pm, PST Support: www.adstech.com/support/support.asp www.adstech.com European Technical Support: +353.61.702042 Tech...
Introduction Red Rover puts the recording controls you use most at your fingertips! You can do your tracking and control up to 128 tracks without even looking at the computer monitor. Now that you can control the software from ten feet away from your computer (or even farther away with an optional USB extension cable), you will never have to worry about your guitar picking up interference from you monitor or your drum set being across the room from you keyboard and mouse.
Page 5
Installing your Red Rover 1. Turn on your computer and load Windows normally. 2. Plug Red Rover into the computer’s USB port. USB-compatible device detection messages will appear on screen. During this time Red Rover’s LCD screen will read “Initializing…” 3.
Page 6
Use in Adobe Audition’s Mulitrack View Track Select Turn this knob to select the active track. Track Volume, Input and Output Device, and mute, solo, and record displays and controls all relate to the current active track. The LCD screen shows the number of the active track.
Page 7
Out (Playback) The LCD screen displays the active track’s output device number. If the track is assigned to a bus, Red Rover will display the bus letter. Level Meter On playback, the Level Meter displays the session’s volume amplitude. On recording, the Level Meter displays the input level of the active track from the sound card.
Page 8
Transport controls • Press and hold the rewind button to rewind. Double press (pres twice quickly) to jump to the previous cue. • Press the Stop button to stop. Press and hold the Stop button and press the record button to enter record monitor mode. The level meter will display input levels for the active track’s input device.
Troubleshooting and FAQ Q: Can I use Red Rover with my sound card A: Yes, Red Rover works with any sound card. Q: Can I use Red Rover with a USB hub, or do I need to plug it directly into my computer? A: Red Rover works when plugged into a USB hub or directly into the computer.
Page 10
Q: I need to control my software from more than 10 feet away. Will Red Rover work if I extend its cable with extension cables? A: It might, but we recommend against the use of passive extension cables. Adding passive cable to Red Rover’s cable can cause data loss and cause synchronization problems between Red Rover’s display and the computer.
Return/Replacement: If you need to return your ADS Technologies product you should return the product directly to the dealer or store where you purchased the product. Each individual computer store or dealer sets product returns policies for their customers. ADS Technologies, Inc. cannot be responsible for the actions or policies set by our dealers.
ADS Technologies, Inc. product or inability to use the product, even if the dealer or ADS Technologies, Inc. has been advised of such lia- bility or other claims. This includes damage to property and, to the extent permitted by law, damages for personal injury.
Page 13
North America Support Hours Phone: 562-926-4338 M-F: 8:00 am - 5:00 pm, PST www.adstech.com Support: www.adstech.com/support/support.asp SOUTHERN EUROPE OFFICE 51-55 rue Hoche 94200 Ivry sur Sein Phone. 33+(0) 1.43.90.19.20 Fax. 33+(0) 1.46.58.67.06 Part No. 120-511 Tech www.adstech.com...
Need help?
Do you have a question about the RedRover RDX-120 and is the answer not in the manual?
Questions and answers