ACR Electronics OLAS CORE Setup And Range Test
Hide thumbs
Also See for OLAS CORE:
- Quick start manual (12 pages) ,
- Setup and range test (4 pages) ,
- Accuracy testing (2 pages)
Advertisement
Quick Links
Setup and Range Test
Note:
iPhone
Search
OLAS: Wireless
Marine Safety
Ultimate Sports Engineering
GET
5.0
4+
Age
What's New
Preview
1. Download the ACR OLAS App from Google Play or the
App store. (type "acr olas" into the search bar to search
for app)
Press for 4
seconds until
light briefly
flashes green
3. Switch on 1 ACR OLAS Tag or 1 OLAS Float-On.
5. You should always try to install your Core at least
0.5 meters from any equipment transmitting radio
signals including VHF Radios, antennas and cables.
Do not test at home. The system has been designed to be tested on a vessel.
Android
Exposure OLAS
- Overboard
Location Alert
System
Ultimate Sports Engineering Ltd
PEGI 3
i
Install
About this app
1m
2. Locate a 5V USB port near the center of the vessel.
Note: Power banks will not power the Core.
4. Plug in the power to the Core.
6. If located within 0.5 meters it is possible false alarms
may occur. If you are experiencing false alarms try
moving the Core hub away from other electrical
devices and then carry out the Core setup and range
test to see if the false alarms still occur.
www.acrolas.com
50ft
5V
USB
1m
Advertisement
Related Manuals for ACR Electronics OLAS CORE
Summary of Contents for ACR Electronics OLAS CORE
- Page 1 Setup and Range Test Note: Do not test at home. The system has been designed to be tested on a vessel. iPhone Android 50ft Search OLAS: Wireless Exposure OLAS Marine Safety Ultimate Sports Engineering - Overboard Location Alert System Ultimate Sports Engineering Ltd What’s New PEGI 3 Install...
- Page 2 Setup and Range Test 7. Hold the OLAS tag or Float-On within 1 meter of the 8. Wait for 30 seconds and listen for the indication sound. Core. After 30 seconds 1 beep will be heard to indicate 1 OLAS transmitter is being tracked. Device Selection Please choose which OLAS method you wish to set up...
- Page 3 Setup and Range Test 0438 0438 Near 0438 13. Check that the tag displayed on the app home screen 14. Leave the Core in its location and either walk with your has the same ID number as the tag you are testing with. mobile device or place it in a location where you will be The tag's ID number can be found on the underside of able to hear the alert.
- Page 4 Setup and Range Test 0438 Near 0152 Near Your Core system is now setup. 0347 Near It is advised to test the alarm regularly. Instruction on how to do this can be found in the 'Alarm Testing' guide. 0597 Near 19.