Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for OSSIA COTA
- Page 1 COTA® WPT SYSTEM USER MANUAL VERSION 1.2 • DC-1145 • JUNE 2019...
- Page 2 3 Operating the Cota WPT Source and Cota WPT Client .......
- Page 3 AC power cable. The Cota WPT client shall be placed within 1 meter of the front of the Cota WPT source and at no more than a 60° offset from the front of the Cota WPT source. The Cota WPT client shall be installed in accordance with the installation guidelines described in DC-1155_Ossia_Cota_WPT_Client_Installation_Guidelines.pdf.
- Page 4 1. Go to System >> Health Monitoring, click the System Status tab, and verify that all the components under the Components Status are green. 2. The Cota WPT clients are factory registered with your Cota WPT source and will appear on the Cota Web Admin page.
- Page 5 Power: Continuous Wave (CW) Signal Data: IEEE 802.15.4 Frequency 2.4 to 2.5GHz Power Field 60° from the front of the Cota WPT source, horizontally and vertically to a maximum distance of 1 meter Operating Temperature 10 C to 40 C Environment Indoor use only...
- Page 6 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE Changes or modifications to the Cota WPT client or Cota WPT Source not expressly approved by Ossia could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the COTA and is the answer not in the manual?
Questions and answers