Advertisement
From the inner side of the bottle, push the valve
through the hole.
With a lid and rubber being present, it may be difficult;
26
if so, release the rubber band from the lid.
Remounting the rubber band demands a simple hook
as shown in the next item.
A simple hook for pulling out the rubber band so you
27
can attach the lid.
Push down the black ring and secure it with an O-ring
28
as shown.
KC Denmark A/S is not, and cannot be held, responsible for any damage(s) made to equipment or to
operators who ignore safety precautions or because of misuse or wrong operation.
An expert maintenance technician fully familiar with the attendant hazards must only do all maintenance,
inspection and repairs.
When working on the unit in areas, which are difficult to access or hazardous, ensure to take adequate
safety precautions for the operator and others in compliance with the provisions of law on health and
safety at work.
Replace worn component with original spare parts. Use the lubricants (oil and grease) recommended by
the manufacturer.
60.xxx – Niskin Bottles – Manual, ver. 3.00
Safety Regulations
10
Advertisement
