Advertisement
Quick Links
PYRO A/V Link 4-Position Dip Switch Settings – Rev E
Automatic Format Detection – There is no need to set the video source as NTSC, PAL or Secam. A/V
Link detects the video format and sets the capture format automatically, supporting N5TSC, PAL or
Secam video input.
IRE – Black Level switch – You now have the option to set the black level to 7.5 IRE to 0 IRE. 0 IRE
is used primarily in Japan but some users had requested that this option be available.
Audio Sampling Rate – DV Camcorders record audio at either 12-bit or 16-bit sample rates and now
the A/V Link has a switch that you can set to match the settings your camcorder uses. Set to either 12-
bin/32kHz or 16-bit/48kHz audio sampling rates.
Dip Switch Settings
Switch
Settting
1
Color IRE:
2
See below
3
See below
4
Audio Sampling Rate:
Switches 2 and 3 – DV Device / Operating System Selection
The device is factory-set to be most compatible with the 1394 timing for Windows XP. You can easily
set the dip switches to match the timing of the device or operating system with which you are
interfacing.
DV Device / Operating System
DV Camcorder
Windows 2000
WinXP, Win98SE, WinMe
Mac
Down = 0 IRE
Down = 12-bit/32 kHz
Switch 2
Down
Down
Up
Up
Up = 7.5 IRE (default)
Up = 16-bit/48kHz
Switch 3
Down
Up
Down
Down
Advertisement
