Da118 And Da120 Main Functions - Nielsen PPM 360 METER Equipment Manual

EQUIPMENT MANUAL:
MODELS DA118 and DA120 PPM 360 Meter
Document #: 1050-xxxx
Revision: B

DA118 and DA120 Main Functions

1. Audio data Acquisition Functions: Data collection through the DSP, and then transmitted to
specified Server through the meter's Machine-to-Machine Data Transfer
2. Machine-to-Machine Data Transfer Function: Use only on a mobile phone SIM card,
Machine-to-Machine Data Transfer function will collect the data set to the specified server. It does not
utilize a SIM card for various number of services, such as ADN, SDN, FDN.
3. Bluetooth function with In- Hom e Beac on : The In-Home Beacon function has only a
search feature. It can only search for the In-Home Beacon Device ID and Bluetooth address. The
In-Home Beacon function do es n ot s up p or t Bluetooth connectivity, data transmission or other
functions. In addition, meter Bluetooth cannot be searched.
4. The purpose of the alternate equipment PPM 360 Collector is to replace the meter Machine-
to-Machine Data Transfer cellular technology with an alternate data transfer method, in areas where
cellular technology is not available. The PPM 360 Collector is not normally provided to a panelist. As
of the time when this User Manual is written, the only country where the PPM 360 Collector is
provided is Canada. However, if the PPM 360 Collector is provided to a panelist, the specific PPM
360 Meter provided to the panelist is specially configured by software to enable communication with
the specific PPM 360 Collector provided to the panelist. In this case, Bluetooth connectivity,
Bluetooth data transmission and other Bluetooth functions are enabled between the PPM 360 Meter
and the specific PPM 360 Collector, and only between these two devices.
CONFIDENTIAL AND PROPRIETARY INFORMATION
Copyright © 2015 The Nielsen Company. All rights reserved.
10