Decko MightyDigger Instructions

Thank You for purchasing the MightyDigger!
This outdoor toy has been made to provide your child with years of creative fun, while helping them
develop their hand / eye coordination skills. Below you will find the assembly instructions, use &
care for your new MightyDigger. Please read all notes / instructions below and attached.
Caution:
-This toy is intended to be used to dig & move loose sand, dirt, mulch or snow.
It is not intended to be used to dig into packed sand/s, dirt, clay soil, rocks/gravel, ice or any
other hard/heavy packed material. Doing so my damage or break your MightyDigger.
-The MightyDigger is intended for children 3+ years of age / max weight limit of 70LBs.
-Adult Supervision is recommended.
-This toy is intended to be used by one child in the area of operation only.
-Before operation, instruct your child and others in the area of operation to keep hands and feet
away from the moving parts of the MightyDigger to avoid pinching or other injury.
Included Hardware
for assembly:

Tools needed for assembly:

#2 Phillips screw driver & #10 Metric wrench, #10 socket / ratchet wrench or adjustable wrench

Assembly Instructions:

#1-Bolt on the seat using the 2-6x25MM bolts, washers & lock nuts provided see Fig.1A.
#2-Bolt on the scoop using the 2-6x15MM bolts & lock nuts provided see Fig. 2A.
2-6x25MM Bolts
Fig. 1A
Please Note: The washers
should be between the bottom
side of the bolt heads and seat.
2-6x15MM Bolts 2-Washers 4-Lock Nuts
Fig. 2A
Page #1 of 2