Do you have a question about the Versa and is the answer not in the manual?
Questions and answers
Summary of Contents for 4xem Versa
Page 1
800MHz FSB Pentium 4 System General Information... Installation Procedure... Upgrade Models... User's Manual...
Page 2
WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.
General Information General Information Item Checklist A. System Part List: Mainboard Layout CLEAR CMOS Front Panel Connector B. Barebone System Part List: Rear Panel Connector CLEAR CMOS (JP1) Pin 1-2 to Normal Pin 2-3 to Clear...
Page 5
Installation Procedure Installation Procedure 2 Drive Installation 2.1 Corresponding models: Standard, SPDIF, 1 LAN, 1Gb LAN, Mini PCI, 3 RS-232, TV-Out Part List 2.1.1 Installation...
Page 6
Installation Procedure Installation Procedure 2.1.2 Install Standard HDD Note Note: Flip the Standard HDD over Install Standard HDD to bracket. Tighten Standard HDD with screws to bracket. Install UDMA ATA cable to HDD device. Install to HDD power connector. 2.1.3 Install CD-ROM Install CD-ROM to CD-ROM bracket.
Page 7
Installation Procedure Installation Procedure 2.1.4 Install Case Install mainboard into the case. Tighten rear panel with screws on the case. Stick on the plastic stand. 2.1.5 Unpacking Procedure Remove the screws on the rear panel from the case. Pull out the mainboard from the case. Complete CPU/cooler Complete Memory...
Page 8
Installation Procedure Installation Procedure 2.2 Corresponding models: PCMCIA, 3 LAN, DVR-1, DVR-4, CF reader Part List 2.2.1 Installation...
Page 10
Installation Procedure Installation Procedure 2.2.4 Install CD-ROM CD-ROM Note: Power input DC 19V only Install CD-ROM to CD-ROM bracket. Tighten CD-ROM with screws to CD-ROM bracket. Insert plastic spacer to the CD-ROM adapter. Install CD-ROM 44-pin Cable to CD-ROM adapter. Tighten CD-ROM adapter and CD-ROM with screws.
Page 11
Installation Procedure Installation Procedure 2.2.5 Install Case Install mainboard into the case. Tighten rear panel with screws on the case. Stick on the plastic stand. 2.2.6 Unpacking Procedure Remove the screws on the rear panel from the case. Pull out the mainboard from the case. Uninstall the drive adapter from the mainboard.
Page 12
Upgrade Models Upgrade Models Standard PCMCIA PCMCIA 3 LAN Realtek 8139C 3*100Mb LAN DVR-1 1*BT878A DVR-4 4*BT878A CF reader CF reader Specifications are subject to change without notice, reference only. SPDIF 1 LAN 1Gb LAN Mini PCI 3 RS-232 TV-Out addition SPDIF Realtek 8100C...
Need help?
Do you have a question about the Versa and is the answer not in the manual?
Questions and answers