Advertisement
Table of Contents
Thank you for purchasing our All Weather Glider. Assembly of this
product requires a 4mm hex key which is included.
We have found it helpful to have a second person present in at
least one step of the assembly
STEP 1
Read through these instructions thoroughly before beginning
assembly. We have found this to be of great value when first
assembling this product.
STEP 2
Remove all parts and hardware from packing material. Pieces
should be placed on a non abrasive surface (like the carton or
carpet) to prevent damage to the finish.
STEP 3
ALL WEATHER GLIDER
Identify all parts using assembly instructions on next page
STEP 4
Identify and count hardware using assembly instructions on next
page.
1 of 3
Advertisement
Table of Contents
Summary of Contents for LL Bean All Weather Glider
- Page 1 Thank you for purchasing our All Weather Glider. Assembly of this product requires a 4mm hex key which is included. We have found it helpful to have a second person present in at least one step of the assembly STEP 1 Read through these instructions thoroughly before beginning assembly.
- Page 2 10/24/07 Step 2 Assembly Instructions Step 1 Attach back to seat and sideframes Attach sideframes and back to seat Model: All Weather Glider chair bolts using (2) 1¾” using (12) chair bolts 1¾” Attach long brace to sideframes using chair bolts (2) 1¾”...
- Page 3 Care This material is made of HDPE plastic resin that has been purified and UV protected. It is generally cared for and cleaned with soap and warm water. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the color.
Need help?
Do you have a question about the All Weather Glider and is the answer not in the manual?
Questions and answers