Cleaning And Maintenance; Technical Specifications; Instructions And Information Regarding The Disposal Of Used Packaging Materials; Disposal Of Used Electrical And Electronic Equipment - Sencor SCF 4200WH Translation Of The Original Manual

■ If you need to cancel the timer, press button B4 on the convection heater or button
D4 on the remote control. The timer digits will start flashing. Using the ▲/▼ buttons
on the convection heater or the +/- buttons on the remote control, set "00". Your
settings are saved when the timer digits stop flashing. The timer icon C3 on the
display A1 will turn off.
Note:
The convection heater will start running in the last selected operating
mode and temperature. If you need to change the operating mode or
temperature, proceed according to the instructions in part "Selecting
an operating mode" and "Setting the temperature". The mode and
temperature can be changed at any time while the timer is running.
Delayed start
While the convection heater is off, press button B4 on the convection heater or button
D4 on the remote control. The timer icon C3 will be shown on the display A1 and the
timer digits "00" will start flashing. Use the ▲/▼ buttons on the convection heater or
the +/- buttons on the remote control to set the time after which the convection heater
is to turn on. Your settings are saved when the timer digits stop flashing. The timer icon
C3 will remain lit on the display A1. The set time in hours will start counting down on
the display A1. After the set time has elapsed, the convection heater will automatically
turn on in the last selected mode and temperature.
The delayed start can be set in the range from 1 to 24 hours.
If you need to cancel the timer, press button B4 on the convection heater or button D4
on the remote control. The timer digits will start flashing. Using the ▲/▼ buttons on
the convection heater or the +/- buttons on the remote control, set "00". Your settings
are saved when the timer digits stop flashing. The timer icon C3 on the display A1
will turn off.
Controlling the convection heater using a smartphone
■ Thanks to the "TuyaSmart" application, you can also control the convection heater
directly from your mobile phone.
■ Install the "TuyaSmart" application on to your smartphone. The application is
available for operating systems iOS (iTunes) and Android (Google Play).
google Itunes
■ In order to control the convection heater using the installed application, WiFi must
be turned on. To turn on WiFi, hold down the On/Off button B3 for approximately
5 seconds. The WiFi icon C9 will start flashing. If the WiFi icon C9 flashes quickly,
this indicates a fast connection; if it flashes slowly, this indicated a compatible
connection. To toggle between the fast and compatible connection, hold down
the button B3 for approximately 5 seconds. When connecting for the first time, we
recommend the fast connection, i.e. icon C9 flashes quickly.
Note:
Turning on WiFi and changing the speed can only be performed using
button B3 on the convection heater. In this case, the remote control
will not function.
■ Open the "TuyaSmart" application and log in.
■ Click on "Add Device" and select "Heater" from the list.
■ In the next step, you will be requested to turn on the convection heater and to check
whether you have a fast WiFi connection. Confirm by tapping on the respective icon.
■ Now enter the password for your WiFi network and confirm. Wait until a connection
is established.
■ Then click "Done" and you will be able to control your convection heater via this
application in your smartphone.
■ The WiFi icon C9 will always be lit when a successful connection is established.
Note:
In the event that the connection fails, click on "AP Mode" (application
mode) and confirm compatible connection instead of fast connection.
Note:
Unlike in the basic convection heater controls described above, when
the application is used it will also be possible to set a weekly timer.
This timer is only available in the application. Set the weekly timer
according to the instructions in the application.
Thermal protection
■ The appliance is equipped with a thermal fuse that automatically turns it off upon
overheating.
■ Should such a situation occur, turn the appliance off and disconnect it from the
power socket. Then allow it to cool down for at least 15 minutes.
■ Before you put the appliance back into operation, check that its vents are not
blocked.
■ If you are unsuccessful putting the appliance back into operation, please contact an
authorised service centre.
Copyright © 2019, Fast ČR, a.s.

CLEANING AND MAINTENANCE

■ Disconnect the power plug from the power socket and allow the appliance to cool
down before cleaning it.
■ For cleaning, do not use cleaning products with an abrasive effect, solvents, etc. that
could damage the appliance.
Warning:
To prevent the risk of injury by electrical shock, do not submerge
the appliance, power cord or power plug in water or any another
liquid.
■ Keep the appliance in a clean condition. Clean the appliance regularly to ensure dust
does not accumulate inside.
■ To clean the outer surface of the of the appliance, use a clean, dry cloth. To remove
dust from the outer surface, you may also use a vacuum cleaner.
Storage
■ When not using the appliance for an extended period of time, disconnect the power
plug from the power socket, allow the appliance to cool down and clean it according
to the instructions in chapter "Cleaning and maintenance".
■ Before storing it, check that the appliance is clean and dry.
■ Store the appliance in a dry, clean and well-ventilated location not exposed to
extreme temperatures and out of children's reach.

TECHNICAL SPECIFICATIONS

Rated voltage range ........................................................................................................220 – 240 V~
Rated frequency........................................................................................................................50/60 Hz
Rated power input .....................................................................................................................1,500 W
Temperature range .................................................................................................................. 5 – 50 °C
Protection class ..................................................................................................................................IP24
We reserve the right to change text and technical specifications.
INSTRUCTIONS AND
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retaile.
This product meets all the basic requirements of EU directives related to
it
- 8 -
INFORMATION REGARDING THE
08/2019