Advertisement
Operating Instructions
Operating The Klearside® Side Rails
Raising (Head end)
Raising the head-end first means
there is reduced risk of occupant fal-
ling from bed. To raise the head end
side rail:
1)
Depress the top button on the
side of the head board.
2)
Pull the side rail up until it is
higher than the button. Then
release the button.
Attaching Velcro
To further reduce the risk of entrap-
ment, we recommend securing the
Klearsides to the head/foot boards
using the supplied Velcro.
BaKare Beds The Klearside® Manual Last updated March 2019
Raising (Foot end)
1
2
2
To raise the foot end side rail:
1)
Depress the top button on the
side of the foot board.
2)
Pull the side rail up using the
hand loop until it is higher than
the button. Then release the
button.
Warning— Both ends of the side
rail must be raised.
Lowering the side rails means follow-
ing the previous steps in reverse,
starting from the foot end.
Warning— Both ends of the side
rail must be lowered.
Page 6
Lowering
© BaKare Beds 2019 Issue 09
Advertisement
