Advertisement
Available languages
Available languages
4 English
5.2 Electrical connection
at a place suitable according to the pro
install the pump cable in the thermal protec
screw connection opening from the outside into
Tighten the screw connection of the cable reali
The pump must always be covered with water. This also applies to the trial
operation.
5.3 Checking the direction of rotation of the pump
Never pull the pump on the electrical cable or pressure hose
Avoid cross section narrowing
at room temperature
THE MANUFACTURER EXPLAINS:
7. SERVICING
Intactness of the electric cable
That the connection hoses are not bent or broken
8. GUARANTEE REGULATIONS
Improper servicing and improper use
Moreover, we give no damage compensation for secondary damages!
9. RECOGNISING AND REPAIRING OF MISTAKES
Problem
Possible cause
Pump runs, no water is
cape)
being pumped
Impeller wheel is blocked
Pump does not start or swit
pump off
ches itself off
Pump is inserted to deep
have a leak
slows down or stops
Impeller wheel is worn down
English 5
Solution
Impeller wheel must be cleaned
Pump needs to be cooled
Insert pump not so deep
Advertisement
