Table of Contents
Advertisement
Quick Links
Section 4.0 system components
With sophisticated digital signal processing and high quality design, SR-436S
provides users unparallel mobility and flexibility in a wide variety of business settings
as we've shown in the previous demonstration. SR-436S system components include:
Base unit/station
Handset
Charger
External antenna
Lightning protection kit
Section 4.1 system configurations
Our product configurations can be either the "adjunct" system as the wireless
extensions behind the tradition wired PBX or the "stand-alone" system to replace the
traditional key phones system.
#4.11:"adjunct to wired PBX" (using flash)
SR-436S can work off any analog port of PBX that complies with FCC rule part 68.
SR-436S can serve as the wireless extension inside the corporation/ work space. For
those mobile workers who need to talk on the go, they can bring the SR-436 handset
moving around the facility and keep internal/external communication.
Teleco/
P
PSTN
B
X
Analog
port
#4.12: "stand-alone" system
SR-436S can serve as the stand-alone wireless PBX system for SoHo, small office
environments. You can plug in up to 4 telephones line into SR-436S base station and
have the instant 4-line access capability. (when O.S. go to this part, turn the SR-436S
to the back side to show 4 phone jacks design)
SR-436S Installation Guide
SR-436S
base unit
H/
S
H/
S
1
Advertisement
Table of Contents
Related Manuals for SENAO SR-436S
Summary of Contents for SENAO SR-436S
- Page 1 #4.11:“adjunct to wired PBX” (using flash) SR-436S can work off any analog port of PBX that complies with FCC rule part 68. SR-436S can serve as the wireless extension inside the corporation/ work space. For those mobile workers who need to talk on the go, they can bring the SR-436 handset moving around the facility and keep internal/external communication.
- Page 2 (using flash to show the installation) and avoid concrete obstacles such as wall and pillar (using flash to show the installation; show the design of SR-436S base unit to illustrate the capability of wall-mountable.) Please don’t install the base unit just to fit the phone jack or power source which might decrease the range performance (using flash to show the installation.)
- Page 3 Please don’t install the base unit Please don’t install the base unit next to the wall or pillar (concrete just to fit the phone jack or power obstacles) incorrect installation source incorrect installation #4.22 outdoor installation You can even extend the outdoor coverage by installing the optional external antenna. The higher the antenna is installed, the better the communication will be.
- Page 4 Section 4.3: Set up and basic operation #4.31 handset registration SR-436S can accommodate up to 90 users within the system, which means up to 90 handsets can be registered to the single base unit. Handset packaged along with the system is pre-registered in the factory with handset ID as “10”. It’s pretty easy to register additional handsets into the system by following the instruction: Step 1: press handset menu key, then press number “6”...
- Page 5 “off.” #4.34 Voice mail SR-436S offers the built-in voice mail system which allows people to leave voice message if you were not able to answer the call at that moment. Step 1: press “MENU” and follow by pressing number “4” to enter the voice...
Need help?
Do you have a question about the SR-436S and is the answer not in the manual?
Questions and answers