Advertisement
Thank you for purchasing the CMS6100 centralized monitoring system (
Quick Start walks you through installation, configuration and local operation. For more
details please refer to the
Step1 Check kit contents
CMS6100 Monitor
Step 2 Connect the CMS6100 hardware
Plug the CMS6100 into the AC mains
Connect the CMS6100 to your management
network
Step 3 Set up the CMS6100 Monitor
The default Monitor IP Address is
browser on any computer that is LAN connected to the Monitor:
Enter https://192.168.0.1 into the address bar
Note:
Log in using the default system user name
default.
displayed
CMS6100 Monitor Quick Start (520031-Rev 1.0)
User Manual
192.168.0.1
The LAN connected computer must have an IP address in the same
network range (192.168.0.xxx) as the Monitor. If this is not convenient,
ARP Ping
you can use the
Manual
or online FAQ for details). The Monitor also has its DHCP client
enabled by default, so it will automatically accept any network IP
address assigned by any DHCP server on your network – and will then
respond at both 192.168.0.1 and its DHCP address.
An Opengear Welcome screen listing the basic configuration steps is
Quick Start Guide
on the CDROM.
This Quick Start & CD-ROM
(subnet mask
command to set the IP address (refer
root
CMS6100
Monitor
Power cable
255.255.255.0
). With a web
and the default password
). This
User
Page 1
Advertisement
Table of Contents
Summary of Contents for Opengear CMS6100
- Page 1 CMS6100 Quick Start Guide Monitor Thank you for purchasing the CMS6100 centralized monitoring system ( ). This Quick Start walks you through installation, configuration and local operation. For more User Manual details please refer to the on the CDROM. Step1 Check kit contents CMS6100 Monitor This Quick Start &...
- Page 2 You may also wish to enter a System Name and System Description to give the CMS6100 a unique ID and make it simple to identify. Click Apply To assign the CMS6100 Monitor a new static IP address or to permanently ...
- Page 3 CSR for the Certificate Signing Request (CSR) Download the CSR string and send it to a Certification Authority (CA) for certification. They will return you a new certificate which you can then Upload to Monitor CMS6100 Monitor Quick Start (520031-Rev 1.0) Page 3...
- Page 4 Power or View Status/Logs button. Your browser will download a SDT Connector configured Java application from the CMS6100 Monitor which will run on your computer and securely connect you to the relevant screen on Managed Device Managed Console Server CMS6100 Monitor Quick Start (520031-Rev 1.0)
Need help?
Do you have a question about the CMS6100 and is the answer not in the manual?
Questions and answers