Advertisement
Via Artigianato, 85 – 25030 Torbole Casaglia (BRESCIA) – ITALY
Tel +39 030 2650479-88 – Fax +39 030 2650143
www.sigmasrl.info
INSTRUCTION MANUAL
SHEETER MODEL SFG
INSTRUCTION MANUAL: this instruction, user's and servicing
manual gives the directions necessary for transport, setting at work,
use and servicing of this machine and must be read before any of
these operations. This manual must be read not only by the
technicians assigned for servicing, but also by the machine operators;
it is important for them to know how to carry out their functions
properly. This manual is an integral part of the machine and must be
kept in a suitable place so as to safeguard its integrity and make it
possible to consult it during all machine life.
Compliance with the rules guarantees proper operation, safety and
operating saving of this machine as well as operators and users' safety.
1
Advertisement
Related Manuals for Sigma SFG
Summary of Contents for Sigma SFG
- Page 1 Tel +39 030 2650479-88 – Fax +39 030 2650143 www.sigmasrl.info INSTRUCTION MANUAL SHEETER MODEL SFG INSTRUCTION MANUAL: this instruction, user’s and servicing manual gives the directions necessary for transport, setting at work, use and servicing of this machine and must be read before any of these operations.
-
Page 2: Table Of Contents
PAGE …12 10.7) WIRING DIAGRAM PAGE …12 11.0) REQUEST OF SPARE PARTS PAGE …13 11.1) SFG EXPLODED DIAGRAM – TABLE 1 PAGE… 13 11.2) SFG EXPLODED DIAGRAM – TABLE 2 PAGE… 14 11.3) LIST OF THE MAIN COMPONENTS PAGE… 15 12.0) MAIN MATERIALS... -
Page 3: Symbols Page
A healthy person qualified as a mechanical SERVICER servicer and who has read and understood this user’s and servicing manual. • Requests for the manual updating. SIGMA SERVICING • Telephone help concerning operation. • Telephone help concerning startup or Tel. +39 030 2650479 machine failures Fax +39 030 2655143 •... -
Page 4: Description Of The Machine Page
2.0) DESCRIPTION OF THE MACHINE 2.1) GENERALITIES: The SFG puff pastry processors are rolling machines to be used in catering, bakery and gastronomy laboratories to prepare foodstuffs. They must fine down food pasta layers with butter, margarine or eggs (special version) in order to obtain pastry in the thickness desired. -
Page 5: Operative Conditions Page
4.0) OPERATIVE CONDITIONS: Local conditions: the machine requires to be installed in a lighted, airy building, on a compact and flatten support. Temperature ranging from 5 to 40°C; humidity not over 50% at 20°, or not over 90% at 40°C. Lighting: lights available for the operator must comply with the type of work being carried out, according to the general lighting, in compliance with the regulations in force. -
Page 6: Plane Movements Page
6.3) PLANE MOVEMENTS : The machine is equipped with two wheels; after unpacking it and removing the pallet fastenings, it can be carefully set on the floor and moved to a plane and smooth surface. The belts are in the box, but not assembled; their transport can be done by hand. -
Page 7: Operating Instructions Page
8.0) OPERATING INSTRUCTIONS The belts must be assembled and the protection grid and the rollers lowered otherwise the safety systems prevent the machine from working. DO NOT REMOVE OR RIG THE ELECTRIC AND MECHANICAL PROTECTIONS AND SAFETIES OF THE MACHINE. 8.1) INSTRUCTIONS TO ASSEMBLE THE SCRAPERS: The scrapers are already housed on delivery. -
Page 8: Machine Operation: Controls Page
8.4) MACHINE OPERATION: CONTROLS 1) Master circuit breaker with mains signal lamp. 2) Control lever and motion reverse. 3) Control pedal and motion reverse (upon request). 4) Adjusting lever for fining down. 5) Trigger for lever 4 6) Ratchet of lever 4 8.5) SAFETY WARNINGS: Space around the machine must be properly lighted, clear and clean. -
Page 9: First Startup Page
8.8) FIRST STARTUP:Make sure the protection grids are lowered before any operation when the current is on. Just press button 1 to start the machine , the closure of the circuit is signalled lighted lamps. Lower lever 2 as shown figure test correct connection, the belt must move to... -
Page 10: End Of The Job Page
9.2) END OF THE JOB: clean the machine by removing the deposits on rollers and belts. Disassemble the scrapers and clean them with the greatest care: the machine works better if these parts are in good conditions. 9.3) SAFETY DEVICES: The machine is fitted with a set of safety devices that safeguard the operator. -
Page 11: Clutch Side Page
10.3) CLUTCH SIDE The clutch, the speed change unit of the belts and roller adjustment are accessible by disassembling the guard from this side Grid and belts micro faults: remove the gear protection guard, check its working condition, close the guard and test the machine. -
Page 12: Possible Failures And Repairs Page
10.6 EXTRAORDINARY SERVICING: Please refer to SIGMA Srl authorised personnel to carry out actions that are not specifically mentioned in this manual. Refer to our servicing department to work at the place or to service it at our premises to replace the motor, the drive, electronic cards and important mechanical parts or following machine falls. -
Page 13: Request Of Spare Parts Page
11. 0) REQUEST OF SPARE PARTS: Ask SIGMA S.R.L. servicing department for spare parts: tel. +39 030 2650479/488 – fax +39 030 2650143 11.1) SFG EXPLODED DIAGRAM – TABLE 1... - Page 14 11.2) SFG EXPLODED DIAGRAM – TABLE 2...
-
Page 15: List Of The Main Components Page
SFG 600 scraper 01174087 SFG 500 scraper 13000014 Radial bearing, mod. 6203 2RS 01174029 Hub for left motor roller 06001009 SFG 600 NR11 2360x600 belt 06001008 SFG 500 NR11 1400x500 belt 01072093 SFG 600 rolling-pin 01072092 SFG 500 rolling-pin 01174025... -
Page 16: Main Materials Page
14002671 11-20-182-02 pincer rest 01174028 Hub for right motor roller 17000042 Wheel in polyamide 6 SRP/NL 684501 17000044 Wheel in polyamide 6 SRP/FR 686801 08072079 Spring for pedal micro 25001320 Microswitch MV 15 03174004 Guard on motor side 12003949 Multigrip 430 J 12 belt 01174070 Motor pulley 01091011... -
Page 17: Analysis Of Risks, Prohibitions And Obligations Page
13.0) ANALYSIS OF RISKS, PROHIBITIONS AND OBLIGATIONS. No use of water for No startup before checking No cleaning when the machine fire-fighting protections is operating Strong shocks can unhook the protection grid. 380 V The machine stop immediately, lower the grid. 14.0) WASTE DISPOSAL: The buyer is completely responsible for the machine deactivation.
Need help?
Do you have a question about the SFG and is the answer not in the manual?
Questions and answers