Table of Contents
Advertisement
Disassembly & Reassembly
12-1-2 Disassembling the CRT and Chassis
Part Name
Chassis
① Separate the Ass'y Holder chassis from the Front Cabinet.
Holder
② Pull the Chassis Holder lifting the fixing clip up.
Notice: Pulling the Chassis Holder by force may damage the
clip or the connector. Pull the Chassis Holder just until the clip
comes off the hole.
① Separate the Speakers, the Speaker Wire, the D-Coil Master
Wire, and the Remote Control Sensor Cable from the Front
Cabinet and the System Board.
② Separate the wire from the Wire pressing the at.
Notice: Since there is a clip to connect the Connector Header
in the Wire Connector, pulling it by force may damage the clip or
the connector. Press the clip down completely and pull the con-
nector.
① Separate theAV and Main Board from the Front Cabinet and
AV Wire, GT-Pin Wire.
② To separate the Wire, Fixing clip and pressing the Wire.
12-2
Description
Description Photo
Pull the chassis while raising the
clip fixing the Front Cabinet and
the Holder Chassis
Samsung Electronics
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
