Introduction; Machine Placement; Setting Up Allstar Machine - Ellison AllStar Instructions For Use Manual

Ellison AllStar Die-Cutting System
The Ellison AllStar die-cutting system consists of the
AllStar Machine, steel-rule dies and a Die Storage Rack
(each sold separately or in kits, refer to Ellison AllStar
catalog or visit Ellison.com/educators for details). This
value-added package gives you the same outstanding
brand quality that you have come to expect from Ellison.
Locking Knob
Indicator
Window
4
Handle
Lever
Cutting Pad
Drawer
Instruction for Use of
AllStar Die-Cutting System
Place the machine on a
clean, smooth and non-skid
surface at a comfortable
height adequate to keep face
clear of the handle arc when
it is in motion.
Unlock the handle by pressing
in on the Locking Knob and
rotating it counter-clockwise
with the machine handle
lever pressed down, until the
indicator window displays
green.
Remove the Cutting Pad
from the drawer located in
the front of the machine
and place it on the working
area of the machine.