Advanced Control Technologies HomePro ZCU201 Quick Manual

HomePro
RF Home Automation

FEATURES

• Provides a USB interface to Z-Wave enabled devices.
• Connects to any USB port or powered USB hub.
• Complete with USB connector cable and 230V
power adaptor

PRODUCT DESCRIPTION

The ZCU201 USB Interface allows you to
communicate from any USB port to control Z-Wave
enabled products, freeing serial ports for other use.
ACT does not provide any computer software for this product. This
product is intended to be used with third party software developed using
the Z-Wave dll, which is available in the Z-Wave™ Developers Kit.
A third party software provider may elect to update the firmware
with future versions of the Z-Wave library, or request that ACT
update the firmware (at an added charge). Contact your sales
representative for more details.
HomePro wireless radio frequency products utilize Z-Wave™ technology to
communicate and inter-operate, and are compatible with other Z-Wave™
enabled products.
ZCU201 has non-skid feet for placement on horizontal surfaces.

ORDERING INFORMATION

Specify: ZCU201 - USB to Z-Wave Interface, with 230V Power Supply

SPECIFICATIONS

Electrical
Power
Signal (Frequency)
Range
Mechanical
Dimensions
Weight
User Interface
Environmental
Operating Temperature Range
HomePro
by ADVANCED CONTROL TECHNOLOGIES, INC.
External Power Supply included - 230 VAC to 9 VDC Power Supply
(200mA) with 2.1mm power plug, center (+) positive.
868.42 MHz
Up to 30 meters (line of sight) between the USB Interface and the
closest Z-Wave enabled product.
13.98cm W x 10.17cm D x 3.49cm H (5.505" W x 4.005" D x 1.375" H)
Approx. 227 grams (8 oz.)
Computer and appropriate software
0-40 C (32-105 F) For Indoor Use Only
O O
0743-01
1
ZCU201
USB to Z-Wave Interface
Power
Supply
Included
ZCU201 Specifications
P/D 111208