Download Print this page

Braun Prosonic BS 9795 User Manual page 28

Braun shavers brochure

Advertisement

r e l e as e
r e l e as e
washable
washable
r e l e as e
r e l e as e
r e l e as e
r e l e as e
washable
washable
old
old
new
new
9000
9000
9000
9000
S e r i e s
S e r i e s
S e r i e s
S e r i e s
r e l e as e
r e l e as e
washable
washable
360°Complete
360°Complete
9000
9000
9000
9000
S e r i e s
S e r i e s
S e r i e s
S e r i e s
360°Complete
360°Complete
Alternatively, you may clean the shaver using the
brush provided:
• Switch off the shaver. Remove the foil and
cutter cassette
surface. Using the brush, clean the inner area
of the pivoting head. However, do not clean the
cassette with the brush as this may damage it.
Cleaning the housing
washable
washable
From time to time clean the housing of the
shaver and the Clean&Renew station with a
damp cloth, especially inside the cleaning
chamber where the shaver rests.
Replacing the cleaning cartridge
After having pressed the lift button
housing, wait for a few seconds before removing
the used cartridge to avoid any dripping.
Before discarding the used cartridge, make sure
to close the openings using the lid of the new
cartridge, since the used cartridge will contain
contaminated cleaning solution.
Keeping your shaver in top shape
Replacing the foil and cutter cassette / reset
To maintain 100% shaving performance,
replace the foil and cutter cassette
the replacement symbol lights up on the shaver
display
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the foil and cutter
cassette. Then the shaver will automatically reset
the display.
After you have replaced the foil and cutter
cassette, use a ball-pen to push the reset button
e
for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
Accessories
Available at your dealer or Braun Service
Centres:
• Foil & cutter cassette No. 9000
• Cleaning cartridge Clean&Renew CCR
8
and tap it out on a fl at
r
(after about 18 months) or when
28
2
to open the
8
, when

Advertisement

loading

This manual is also suitable for:

Prosonic 9795