Guspro BLADEMASTER SH6000 Operator's Manual

Skate sharpening fixture

Hide thumbs

Table Of Contents

The World's Finest Skate

Sharpening Equipment

Blademaster

SH6000

OPERATORS MANUAL

REVISION DATE: September 15 2010

I-SH6000

Table of Contents

Need help?

Do you have a question about the BLADEMASTER SH6000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Guspro BLADEMASTER SH6000

Page 1 The World’s Finest Skate Sharpening Equipment BLADEMASTER SH6000 OPERATORS MANUAL REVISION DATE: September 15 2010 I-SH6000...
Page 2 SH6000 SKATE SHARPENING FIXTURE WARNING: ALWAYS WEAR EYE PROTECTION WHEN OPERATING A SKATE SHARPENER. thanks you for your purchase of the SH6000 Skate Sharpening Fixture. The SH6000 is an accurate Blademaster holder that helps to improve the skate sharpening process and differs in comparison to the traditional skate sharpening fixtures offered by other manufacturers.
Page 3 CLAMPING METHOD The Blademaster SH6000 Skate Sharpening Fixture has a “cam” style quick action clamping system. This method provides a solid means of clamping the skate onto the fixture while allowing the operator to quickly release and re-clamp the skates.
Page 4 OPERATING INSTRUCTIONS The SH6000 Skate Sharpening Fixture has three detent knobs. Each knob will raise or lower the top plate which the skate blade is clamped to. 1. The rear detent knob, when turned clockwise, will allow the sharpener to remove material off the lower edge of the skate blade across its entire length.
Page 5 SHARPENING TECHNIQUES provides the following recommendations for sharpening skates while using the Skate Sharpening Blademaster Fixture. WARNING: ALWAYS WEAR EYE PROTECTION WHEN OPERATING A SKATE SHARPENING MACHINE. Precautions must be made to ensure that proper safety practices are followed to avoid the risk of injury to the operator.
Page 6 MAINTENANCE AND CARE GUIDELINES The Blademaster Skate Sharpening Fixture is a quality precision tool. Any misuse or negligence will affect its performance. Each SH6000 Skate Sharpening Fixture has been calibrated and inspected by our Blademaster technicians using our own Skate Sharpening Machine with a height of 4.5 in from the tabletop to the center of the sharpening wheel.
Page 7 SERVICE & REPAIR Replacement parts and factory service are available. Contact our customer service department direct at 1-888-648-7776 or local service representative.
Page 8 “The Choice of Professionals” Products and specifications are subject to change. is a trademark of Guspro Inc. BLADEMASTER Blademaster - P.O. Box 970, 566 Riverview Drive, Chatham, Ontario, Canada N7M 5L5 Telephone: (519) 352-4550 Fax: (519) 352-7676...