SDI Solo 330 Instructions For Use

Specifications
Suitable detector types : Most models & makes of detector
Maximum working height : Up to 30ft using Solo extension poles
Operating features : Swing frame for difficult to access detectors
Environment : Storage Temperature: 15
Maintenance Notes:

Clean with mild detergent in warm water with a soft, lint-free cloth.

Recommended for use with Solo Aerosol
Other Products Available from your Supplier

SOLO 100 Telescopic pole, extendable, non conductive for accessing detectors at
height to 20ft. Compatible with all other SOLO tools

Extension pole, non-conductive rigid pole section. For use on its own or to
SOLO 101
extend SOLO 100. Max of 3 recommended to reach up to 30ft

SOLO 200 Universal detector removal / replacement tool

110-120v Heat Detector Tester
SOLO 409

SOLO 461 Cordless CAT Heat Detector Tester

Protective Carrying and Storage Bag
SOLO 600
SDi - Suppliers of the World's Most Professional Fire Products
1345 Campus Parkway, Neptune, New Jersey, 07753-6815, USA
Tel: (732) 751 9266 Fax: (732) 751 9241
Website: www.sdifire.com
o o
F to 120 F
Email: info@sdifire.com
330 Smoke Aerosol Dispenser
Brief Description

Designed for smoke detector testing at varying heights

Constructed from strong, durable, yet lightweight materials

Can be used with either Solo Telescopic or Extension poles

Rugged design

Light touch activation for use on suspended ceilings

Can be used at any angle
Instructions for use for Solo 330 Smoke Aerosol Dispenser

Unscrew retainer cup and remove

Place aerosol canister into bottom of retainer cup, nozzle upwards

Replace retainer cup & screw upwards until aerosol canister is just activated by
pressure

Unscrew slightly to stop aerosol self-activation

Insert the Solo 330 product onto Solo Telescopic or Extension Pole

Place Solo 330 over detector, ensuring a seal

Press upwards slightly to activate Solo 330 with aerosol
Form: QA / Instr-1 Issue: 1 Rev: A Date: 18-06-01