System communication not yet established
System not communicating with internal satellite radio hardware (normal
during power-up)
X indicates satellite radio service activated. Numbers indicate satellite
signal quality. 0=none, 1=poor, 2=good, and 3=excellent
- indicates Satellite radio service is not activated. Numbers indicate
satellite signal quality. 0=none, 1=poor, 2=good, and 3=excellent
NOTE
GDL 69 SXM units will appear to indicate satellite service is not active. If data shows up
during the verify activation steps, the activation is valid.
Satellite is not in view, signal quality is 0
Satellite is in view, signal quality between 1 and 3
Satellite is in view and linked
GDL 69 Series SiriusXM Satellite Radio Activation Instructions
Page 5-2
Figure 5-1 Data Link Status Page
Table 5-1 SAT ID Field
Description
Table 5-2 Connectivity Field
Description
Display
--
XM
X0, X1, X2, X3
-0, -1, -2, -3
Display
Searching...
Satellite in view
Linked to sat
190-00355-04
Rev. N