Cleaning And Maintenance - PARMAZ Artrom EA-T98 Instruction Manual

THE USE OF ICE BOX
The ice crystal has a particular feature of keeping cool, it can absorb heat from water and let the
water temperature in the water tank below environmental temperature, so the air will be much
cooler. Using:
a. Pour water to the ICE BOX, water not full the ice box.
b. There have two ICE BOX, cycle use. The two ice box can make water cold fast, pour
water in ice box and make it freeze in refrigerator several hours before use. Put ice
box into the water tank before water tank filled with water.
c. There have two ICE BOX, can use circularly.
Warning: ice buckets should be away from children, the inner liquid cannot be swallowed under
any circumstances. Please, avoid that the liquid inside the ice buckets spills out.

CLEANING AND MAINTENANCE

Attention:
Must unplug the power plug when cleaning.
Don't make the water into the control panel.
The evaporation pad must be installed flatly, in order to avoid leaking.
1. Cleaning the air filter
Always unplug the unit from mains power supply before attempting any cleaning or user
maintenance.
2. Cleaning the water tank
The water tank must be drained of any water after each use. To do so, carefully pull the
water tank out from the unit then hold a suitable vessel underneath to catch the water.
Once the water tank has been drained, wipe away any excess water with a soft cloth.
3. Cleaning the pad and mesh filter
To clean the evaporation pad and mesh filter, pull them up and away from the back of the
unit, then wash them in warm water with a mild detergent and a soft brush. Take care not
to pierce the pad and filter.
Note: Before replacing the evaporation pad and mesh filter, check the drain hole for
any debris or blockages and remove if necessary.
4. Cleaning the exterior
Wipe the unit with soft, damp cloth and dry thoroughly. Do not use flammable liquid,
abrasive cleaning solvents, polishes or scouring pads to clean the humidifier, as this may
cause damage.
Please ensure that the unit and all of its parts are cleaned regularly to reduce the risk of limescale
and bacteria forming. The evaporation pad must be installed flatly, in order to avoid leaking.
MALFUNCTION AND MAINTENANCE
Repair the device in the following situations:
1. Abnormal function or not working
2. Abnormal function when water or some object has been introduced.
11