Summary of Contents for IBL Specifik JETBIO
- Page 1 Designer and manufacturer USE AND MAINTENANCE MANUAL JETBIO 2020 stainless steel 316L Surface disinfection by air READ CAREFULLY BEFORE USING...
- Page 2 General informations JETBIO is an air disinfection device. The device sprays a disinfectant product into the atmosphere, the APABIO, thus forming a mist which is then deposited on all surfaces in contact with air. USE AND MAINTENANCE MANUAL Safety instructions (read very carefully) Any electric machine must be used exclusively for the use for which it is intended, respecting the standards mentioned in the user manual.
- Page 3 • Do not pull on the cable to move the machine or to extract the plug. • Only pull the plug when the appliance is switched off. • Never insert or remove the plug with wet hands. • Disconnect the cable before carrying out maintenance. JETBIO new 2020 01/2020 USE AND MAINTENANCE MANUAL...
-
Page 4: For Your Safety
ENVIRONMENTAL PROTECTION Please dispose of the packaging materials and used components of the device in a manner that protects the environment, in accordance with local waste disposal regulations. Don't forget to recycle. JETBIO new 2020 01/2020 USE AND MAINTENANCE MANUAL... - Page 5 Machine structure JETBIO 2020 consists of the following parts: • The machine body, • The 316L stainless steel tank containing the product • The hose for vacuuming the product • The outlet nozzle to distribute the product, handle Air filter...
- Page 6 (especially if they are occupied by human beings) You must direct the JETBIO Vortex jet at 45 ° towards a wall and at 45 ° upwards, in order to create a circular "draft" effect (for better misting efficiency, you can raise JETBIO 2020 on a table or trolley on wheels) If you are equipped with the "Rotation Table"...
- Page 7 FFP3 mask, an integral suit, glasses protective clothing, gloves and over shoes. NOTE 1: The JETBIO machine has been studied and validated to work with the APABIO or DESOGERME disinfectant product at a minimum flow rate of 16 ml / min (minimum setting).
- Page 8 After disinfection, loosen the machine head and transfer the excess liquid from the tank to an appropriate container. Switch on JETBIO for 1 min with the valve open to the maximum. This operation is used to expel all the liquid remaining in the internal circuits of the device.
-
Page 9: Ce Declaration Of Conformity
EEC 89/336 "Electromagnetic Compatibility" Directive Compatibility with World Electrical Systems Electromagnetic Emissions and CE The JETBIO 2020 fogger are shielded against the generation of radio interference in accoroancs with ROHS standards. They also conform to LVD 2006/95 / EEC, Machinery Directive: 98/37 / EEC as well as EN 60335-2-98: 2003 pertaining to safety requirements. - Page 10 NOTES JETBIO new 2020 01/2020 USE AND MAINTENANCE MANUAL...
Need help?
Do you have a question about the JETBIO and is the answer not in the manual?
Questions and answers