1. Manuals
  2. Brands
  3. Clare Controls Manuals
  4. Clock
  5. Schlage BE369
  6. Integration notes

Clare Controls Schlage BE369 Integration Notes

Z-wave door locks
Hide thumbs
Table of Contents

Advertisement

Quick Links

Schlage Z-Wave Door Locks
Integration Notes
For all models
Content
Last modified: 06/21/19

Preface

For information on Z-Wave and ClareHome, see
ClareHome.
Notes
• When installing Z-Wave devices, ensure that there is nothing inhibiting their
signal. Z-Wave relies on radio signals. Metal or thick walls may limit their
signal strength.
• We recommend having 2 or more repeating Z-Wave devices that support
beaming.

Introduction

Schlage Z-Wave door locks integrate with ClareHome via the Z-Wave network.
Installers only need to pair (add) the unit into the ClareHome. The Schlage locks
provide real time lock status indications.
By integrating the Schlage into the ClareHome control system, your customers
can control the door lock from their Android or iOS devices.
Doc ID - 1234 • Rev 10
Installing Z-Wave with
1 / 24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Schlage BE369 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clare Controls Schlage BE369

  • Page 1: Table Of Contents

    Schlage Z-Wave Door Locks Integration Notes For all models Content Preface...1 Introduction...1 Supported models...2 Installing and programming Schlage door locks...2 Pairing, configuring, and removing the Schlage...2 Pairing and removing the door lock with Fusion...16 Creating rules with the Schlage door lock...21 Using the door lock in the ClareHome app...24 Contact information...24 Last modified: 06/21/19...

  • Page 2: Supported Models

    Notes • The door lock must be within 6 feet of the controller to pair. • The door lock is configurable using the Clare app, the Clare Controls Install Assist app, and Fusion. Pairing, configuring, and removing the Schlage After installing the door lock, pair it.
  • Page 3 Access the ClareHome Menu, and then tap Add/Edit Devices. 2. At the bottom of the screen, tap the plus icon Doc ID - 1234 • Rev 10 3 / 24...
  • Page 4 3. Tap Access. 4. Tap Z-Wave Device - Access. 5. Tap Start Discovery Mode, and then pair the device as per the manufacturer’s instructions. Doc ID - 1234 • Rev 10 4 / 24...
  • Page 5 6. Enter a name for the door lock, and then select an area. 7. Tap outside of the area drop-down and the door lock automatically saves. 8. Continue to set or remove Personal Identification Numbers (PINs) for the door lock. Doc ID - 1234 •...
  • Page 6 To add a door lock PIN: 1. Access the Menu , and then tap Add/Edit Devices. 2. Tap Access, and then select the desired door lock. Doc ID - 1234 • Rev 10 6 / 24...
  • Page 7 3. Enter an ID number, and then enter the desired door lock code. Note: Each door lock has a set number of usable IDs and PIN codes. Read your device’s documentation to find out how many IDs are supported and the available format of the PINs.
  • Page 8 To remove a door lock PIN: 1. Access the Menu , and then tap Add/Edit Devices. 2. Tap Access, and then select the desired door lock. Doc ID - 1234 • Rev 10 8 / 24...
  • Page 9 3. Enter an ID number, and then tap Remove Code. Note: The ID number is a user number with an assigned access code. A success message displays, the code is no longer associated with the door lock. Doc ID - 1234 • Rev 10 9 / 24...
  • Page 10 To remove all door lock PINs: 1. Access the Menu , and then tap Add/Edit Devices. 2. Tap Access, and then select the desired door lock. Doc ID - 1234 • Rev 10 10 / 24...
  • Page 11 3. Tap Remove All Codes. A success message displays. Only the master code remains associated with the door lock. All other codes are removed. Doc ID - 1234 • Rev 10 11 / 24...
  • Page 12 To see if here is an existing PIN associated with a user ID: 1. Access the Menu , and then tap Add/Edit Devices. 2. Tap Access, and then select the desired door lock. Doc ID - 1234 • Rev 10 12 / 24...
  • Page 13 3. Enter the desired ID in, and then tap Get Code. If the ID has a PIN associated with it, a redacted code appears in Door Lock Code field. If there is not PIN associated with that ID, an available banner displays denoting that the ID is usable.
  • Page 14 To remove the door lock using ClareHome or Install Assist: 1. Access the Clare Controls Install Assist app, and then tap Add Devices. – or – Access the ClareHome menu, and then tap Add/Edit Devices. Doc ID - 1234 • Rev 10...
  • Page 15 2. Tap the dots in the upper-right corner. 3. Tap Unpair Z-Wave Device. Doc ID - 1234 • Rev 10 15 / 24...

  • Page 16: Pairing And Removing The Door Lock With Fusion

    4. Tap Start Removal Mode, and then remove the device as per the manufacturer’s instructions. Note: Press and hold the same button used in pairing the device to remove the device. Pairing and removing the door lock with Fusion Before installing the door lock, pair it. Note: The BE469NX/BE468NX may have pairing connectivity errors and require more than one pairing attempt.
  • Page 17 2. Click on Z-Wave Devices. 3. Select the device’s location, and then enter a name for the device. Notes • We recommend naming the device after its location to avoid confusion. For example, Entryway Door Lock. Doc ID - 1234 • Rev 10 17 / 24...
  • Page 18 • If you want to add an area, click the green plus icon , enter a name for the area, and then click Add Area. 4. Click Add It!. The Z-Wave adding mode dialog displays. 5. Refer to installation instructions that came with your Schlage device to pair. Note: This varies by device.
  • Page 19 6. The door lock appears in in the added devices list. 7. Click the Summary tab to view all Z-Wave Wizard added devices and their status. 8. Click the Close Window icon in the top-right of the wizard to exit and return to the Devices tab.
  • Page 20 To remove the door lock with Fusion: 1. Access your project, and then click the Z-Wave Wizard icon 2. Click on Unpair a Device. Doc ID - 1234 • Rev 10 20 / 24...

  • Page 21: Creating Rules With The Schlage Door Lock

    3. Click Continue. 4. On the Schlage device, follow the method for removing the device as per its documentation. Note: The removal and adding process vary per device. Creating rules with the Schlage door lock Configure a rule for the Schlage door lock. The following example sets a locked detection rule.
  • Page 22 2. Click the New Rule button 3. Enter a name for the rule, and then select the Enable Rule checkbox. 4. Configure the Event Part as below. Note: This release of the Schlage door locks only supports the Lock/Unlock device. •...
  • Page 23 5. Configure the Action part as below. • Action Type: Send Email • Recipients: The homeowner’s Email address Note: To add an Email address, you must click the green plus icon . Do this for each desired Email recipient. • Subject: The purpose of the alarm •...

  • Page 24: Using The Door Lock In The Clarehome App

    Clare app to display and operate the door locks controls, as shown below. Figure 2: Locked and unlocked Schlage display Contact information Clare Controls, LLC. 7519 Pennsylvania Ave, Suite 104 Sarasota, FL 34243 General: 941.328.3991 Fax: 941.870.9646 www.clarecontrols.com...

This manual is also suitable for:

Schlage be468nxSchlage be469nxSchlage fe599nx

Table of Contents