Related Manuals for Green Frog Designs Chicken Run 2x2
Summary of Contents for Green Frog Designs Chicken Run 2x2
- Page 1 HOW TO ASSEMBLE, USE AND CARE FOR YOUR Chicken Run Printed on recycled paper © Green Frog Designs Limited 2016 Page 1 of 17...
- Page 2 RECYCLED & RECYCLABLE Products from green frog designs are made, wherever possible, from materials that are recycled. Where this is not practical, we always try to use materials that are suitable for recycling. Our plastic is made from recycled waste plastic, predominantly plastic wrapping and carrier bags.
- Page 3 Large Washer Nylock Nut Door Catch Upper Door Catch Lower Door Catch Side Door Lock Door Hinge Holder Door Hinge Part A Door Hinge Part B Printed on recycled paper © Green Frog Designs Limited 2016 Page 3 of 17...
- Page 4 680mm Bar 1295mm Bar Door Frame 600mm Door Bar 2x2 model All models All models All models All models 4x2 model 6x2 model 4x4 model 6x4 model Printed on recycled paper © Green Frog Designs Limited 2016 Page 4 of 17...
- Page 5 6x2 model 6x2 model 6x2 model 6x2 model 6x4 model 6x4 model 6x4 model Pi Clip 2x2 model 4x2 model 6x2 model 6x2 model 6x4 model Printed on recycled paper © Green Frog Designs Limited 2016 Page 5 of 17...
-
Page 6: Tools Required
'horizontal' wire. Use of leather gloves and eye protection is recommended. Also, be aware that the rolls of wire have a tendency to spring back into a roll, which can mean fast moving sharp points. Children should be kept well clear. Printed on recycled paper © Green Frog Designs Limited 2016 Page 6 of 17... -
Page 7: Frame Assembly
– Please refer to the frame layout drawing for your specific run RUN 2x2 – FRAME LAYOUT RUN 4x2 – FRAME LAYOUT A = 3-Way 90 Corner B = 3-Way Flat Tee C = 4-Way Edge Printed on recycled paper © Green Frog Designs Limited 2016 Page 7 of 17... - Page 8 RUN 4x4 – FRAME LAYOUT A = 3-Way 90 Corner B = 3-Way Flat Tee C = 4-Way Edge D = 5-Way E = Spiked Foot Printed on recycled paper © Green Frog Designs Limited 2016 Page 8 of 17...
- Page 9 RUN 6x4 – FRAME LAYOUT A = 3-Way 90 Corner B = 3-Way Flat Tee C = 4-Way Edge D = 5-Way E = Spiked Foot Printed on recycled paper © Green Frog Designs Limited 2016 Page 9 of 17...
- Page 10 Electric Fencing is being used, a Corner Bar is to hang, prior to assembling it. Attachment replaces the lower Door Hinge Holder. Printed on recycled paper © Green Frog Designs Limited 2016 Page 10 of 17...
-
Page 11: Door Assembly
DOOR ASSEMBLY – Same for all run sizes Printed on recycled paper © Green Frog Designs Limited 2016 Page 11 of 17... - Page 12 Door Lock. Tighten the nuts until the Door Part B into one of the Door Hinge Sides as shown, and Lock will move with slight pressure. secure with Pi Clips. Printed on recycled paper © Green Frog Designs Limited 2016 Page 12 of 17...
- Page 13 Clevis Pin door. and R-Clip as fitted. Once attached, the door can be closed and secured by the Door Catch. Printed on recycled paper © Green Frog Designs Limited 2016 Page 13 of 17...
- Page 14 Ensure there are no sharp edges left here (file off any exposed wire, or fold back 25mm of the mesh rather than cut it exactly). Printed on recycled paper © Green Frog Designs Limited 2016 Page 14 of 17...
- Page 15 The gap above the door can be filled with either Wire Mesh or the Netting can be clipped in place to cover it. Printed on recycled paper © Green Frog Designs Limited 2016 Page 15 of 17...
- Page 16 Pi Clip. This drawing shows a corner that inwards. Note: This stage is best done during frame does not have a door. assembly. Printed on recycled paper © Green Frog Designs Limited 2016 Page 16 of 17...
- Page 17 Finally, you can attach an energiser (battery or mains powered) and connect it to the conductors, an earth spike and power supply. You should always display a warning sign. (All these items are customer supplied). Printed on recycled paper © Green Frog Designs Limited 2016 Page 17 of 17...
Need help?
Do you have a question about the Chicken Run 2x2 and is the answer not in the manual?
Questions and answers