Page 2
一、 Function summary LST04-WR is an RGB+W light belt that supports mobile phone WIFI communication and RF remote control. It is a smart light belt with functions such as scene mode, dimming and toning, white light mode, and timing. The product suit icon 二、...
Page 3
三、 Product parameters 外观 Model# 产品型号 LST04-WR Size of light strip 灯带尺寸 10*5000mm 30PCS5050 灯珠/30PCS2835 暖白灯珠 LED qty/meter 30pcs 5050 RGB LED/30pcs 2835 2700K LED 每米灯珠个数 2835 LED 白光灯珠 2835 色温范围 color temperature range 2700K±10% 白光灯珠流明值范围 The lumen value range of 2835 LED 1100lm±20%...
Page 4
LST04-WR 是一款智能 WIFI 灯带,主要功能是通过手机 APP 以及 RF 遥控器实现的。 使用该设备 WIFI 功能之前,需要先进行添加设备。 LST04-WR is an intelligent WIFI+RF light strip. The main functions are realized through APP and RF remote control. Before using the WIFI function of this device, the device needs to be added first.
Page 5
RF pairing method: After the light strip power on, press the first row ON/OFF button on the transmitter repeatedly within 30 seconds. If the device is controlled, stands for the syncing is finished. Description of transmitter function: LST04-WR 遥控器功能说明: ON :打开灯带 turn on the light strip OFF :关闭灯带...
Page 6
2. LST04-WR 手机 APP 功能说明 Description of APP function UI 1 UI 2 UI 3 Interface and function introduction 界面以及功能介绍 界面 1:APP 面板打开的默认状态:可以通过开关来开关灯带 UI1: Default status of open APP panel: you can turn on and off the light strip by switch.
界面 2:调色盘面板,可以选择灯带的色彩、亮度以及浓度等参数 UI 2: Palette panel, you can choose the color, brightness, dimming and other parameters. 界面 3:场景模式选择面板,点按进入到对应的场景模式,点击编辑进入到设置该场景模式设 置界面 UI 3: Scene mode selection panel, click it and enter to the corresponding scene pattern, Click edit to enter the setting interface of this scene mode 五、使用方法...
Page 8
on the top right corner to finish pairing network according to the reminder------choose the mode and color after the APP connect successfully. (三) 连接 RF 发射器 Connect RF transmitter 连接灯带和控制器并通电 》》上电 30S 内来回按下第一组 ON/OFF 按键 》》若设备受控则连接 Connect the light strip and controller and 成功...
Page 9
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the LST04-WR and is the answer not in the manual?
Questions and answers