Cooper Greengate TSW-MV-W Installation Instructions Manual

Cooper Greengate TSW-MV-W Installation Instructions Manual

Digital wall switch timer 120/277 vac

Advertisement

Quick Links

Installation Instructions
Digital Wall Switch Timer 120/277 VAC- Model# TSW-MV-W
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product
must be performed by a qualified electrician. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of
the product and hazards involved.
Before installing or performing any service, the power MUST be turned OFF at the branch circuit breaker. According
to NEC 240-83(d), if the branch is used as the main switch for a fluorescent lighting circuit,
the circuit breaker should be marked with "SWD" . All installations should be in compliance with the National Electric
Code and all state and local codes.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any
maintenance. Disconnect power at fuse or circuit breaker.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in serious injury (including death) and property
damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise
from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing product. Retain for future reference.
NOTICE: Product/component may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
NOTE REGARDING COMPACT FLUORESCENT LAMPS: The life of some compact fluorescent lamps (CFLs) is shortened by
frequent automatic or manual switching. Check with CFL and ballast manufacturer to determine the effects of cycling.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery receipt.
File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery.
All damaged material, complete with original packing must be retained.
NOTICE: All new wiring must be fully verified before applying power.
NOTICE: Designed for indoor installation and use only. Dry location rated.
NOTICE: For use with 120VAC or 277VAC only.
NOTICE: Not for use where temperatures fall below 60
WARNING
o
F or exceed 90
o
F .
Brand Logo
reversed out of
black
Greengate
INS #
INS #

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Greengate TSW-MV-W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cooper Greengate TSW-MV-W

  • Page 1 Failure to comply with these instructions may result in serious injury (including death) and property damage. DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
  • Page 2 Internet. Be sure to fully read and understand customer IT Compliance documentation. Network DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of the products.
  • Page 3 Zero power switching to prolong the life of relay contacts by switching high inrush equipment at or close to zero power. • Incandescent lighting, or motor loads, compatible with electronic ballasts. • Decorator typeface with matching wallplate included. Cooper Lighting Solutions Installation instructions...
  • Page 4 BEEPER: Set ON activating the feature for a beep warning every 15 seconds starting 2 minutes before OFF . BLINK: Set ON activating a feature for load flash 2 minutes before OFF . ON - SWITCH UP “ “= Beeper OFF - SWITCH DOWN “ “ = Blink TIMER BUTTON RESET BUTTON Cooper Lighting Solutions Installation instructions...
  • Page 5 If the load will not turn OFF automatically: Check if the load goes ON/OFF when pressing START/STOP button. If not, check the red wire for good connection. If load does go ON/OFF , consult the factory. Cooper Lighting Solutions Installation instructions...
  • Page 6 Veuillez consulter le site www.cooperlighting.com pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.cooperlighting.com para conocer nuestros términos y condiciones. Cooper Lighting Solutions 1121 Highway 74 South Cooper Lighting Solutions is a Peachtree City, GA 30269 registered trademark. P: 770-486-4800 All trademarks are property www.cooperlighting.com...

Table of Contents