Table of Contents
Advertisement
Tuner features
Tuning
Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
Refer to <Selecting the Source> (page 8).
2
Select the band
Push the Control knob towards [FM] or [AM].
Each time you push the knob toward [FM], it
switches between the FM1, FM2, and FM3 bands.
3
Tune up or down band
Push the Control knob towards [4] or [¢].
⁄
• During reception of stereo stations the "ST" indicator is
ON.
FNC
ST indicator
Band display
Preset station number
Frequency display
Function icon
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
Control knob
FM
AM
SRC
AME
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]
English
|
21
Advertisement
Table of Contents
