Installing And Connecting The Remote Control Receiver - Kenwood KTC-D500E Instruction Manual

Installing and Connecting the Remote Control Receiver

Paste the remote control receiver to the dashboard.
1
Remove the paper from double-stick tape
and paste it on the back of the remote control
receiver.
2
Wipe the dirt and oil off from the installation area
and paste the remote control receiver 6 to the
dashboard.
3
Connect the connectors of the remote control
receiver to the main unit.
⁄
• Wipe oil and dirt off from the installation surface.
• Avoid area where there is direct sunlight or close to TV
monitor because the remote control signals may be
affected.
22
KTC-D500E
Remote control receiver 4
Remote control
receiver 4
Digital TV Tuner 1