Advertisement
Quick Links
PowerPoint
> WPP / WPPH <
> WPPH-KA-28 < > VWBS-KA-28 <
for welding
Safety instructions
This safety instruction/declaration of the manufacturer has to be
kept on file for the whole lifetime of the product.
Translation of the Original instructions
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1460
sling@rud.com
www.rud.com
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
Lifting point PowerPoint
_____________________________________________
PP / WPP / WPPH
The following harmonized norms were applied:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, function and signature of the responsible person
®
_________________
DIN EN 1677-4 : 2009-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
>WPP< able to rotate and >WPPH< fixed
with the variantes ...-S / ...-B / ...-VIP
>VWBS-KA-28<
able to rotate with
chain connection
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
Welding point
_____________________________________________
VWBS-KA / WPPH-KA
The following harmonized norms were applied:
_________________
DIN EN 1677-1 : 2009-03
_________________
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 01.12.2016
Name, function and signature of the responsible person
>WPPH-KA-28<
fixed with chain
connection
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
PowerPoint
®
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RUD PowerPoint WPP Series
Summary of Contents for RUD PowerPoint WPP Series
- Page 1 _________________ _________________ _________________ Authorized person for the configuration of the declaration documents: Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ _____________________________________________ Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Aalen, den 26.09.2016...
-
Page 2: Safety Instructions
• Damaged or worn weld-on lifting points PowerPoint ® Temperatures exceeding 400°C are prohibited! must never be utilised. • RUD weld-on lifting points must not be used with ag- gressive chemicals such as acids, alkaline solutions Intended use of PowerPoint ®... - Page 3 3. Load symmetry: Pic. 4: Max. inclination angle of Pic. 5: Forbidden contact The required WLL of the individual RUD lifting point are 25°, für WPP/ WPPH-S /-B /-VIP or support at/or with edge calculated using the following formula and are based 7.
-
Page 4: Inspection / Repair
Pic. 6: Gap → max. 2.5 mm every usage. VWBS-KA-28 • RUD components are designed according to DIN EN → max. 4 mm 818 and DIN EN 1677 for a dynamic load of 20,000 load cycles. • please check tightening of the lateral positioned locking bolt at all swivel types •... - Page 5 Welding procedure + Welding filler metals: weld seam Europe, USA, Asia, Australia, Africa Type size length volume Baustähle, niedrig legierte Stähle WPP-..-0.63 t 125 mm ca. 2.3 cm³ EN 10025-2 Mild steels, low alloyed steel EN 10025-2 WPP-..-1.5 t 140 mm ca.
- Page 6 Type weight Welding Ref.-No. Ref.-No. [mm] [mm] [mm] [mm] [mm] [mm] [kg/pc.] beam HY + WPPH filled weld (see Pic. 7 + Table 2 + 3) WPP(WPPH)-S-0.63 t 0.63 40 (34) 40 (34) 115 (109) 0.4 (0.35) 7990721 7990722 WPP(WPPH)-S-1.5 t 46 (40) 50 (44) 147 (141)
- Page 7 Method of lift Lifting Attention, when lifting point is attached to the from the side β β side the max. inclination angle ß can only be 25° / resp. until lifting means touches load β max. 25° (compare 4.2, 6)! β...
Need help?
Do you have a question about the PowerPoint WPP Series and is the answer not in the manual?
Questions and answers