Kenwood XD-9580MD Instruction Manual page 65

4
After editing, eject and remove the mini disc.
Image of erasing one track
(TRACK ERASE)
Erasing a part of a track
1 Turn the part to be erased into one track by using the TRACK DIVIDE function.
2 Erase it by using the TRACK ERASE function.
Use the following procedure to erase the desired part of a track.
1Turn the part to be erased into one
track.
Use the TRACK DIVIDE function to
turn the part you want to erase into
one track.
2 Erase the part to be erased.
Use the TRACK ERASE function to
erase the "track" (part you want to
erase) made in step 1.
3 After editing, eject and remove the
mini disc.
"DISC WRITING" displayed during the mini disc ejection
operation indicates that the data associated with recording
or editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
Track to be erased
1 2 3 4
A B C
"DISC WRITING" displayed during the mini disc ejection
operation indicates that the data associated with recording
or editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
1 2
D A B
Track Nos. are adjusted.
Should be approx. 2 sec. or longer.
Should be approx. 2 sec. or longer.
1 2
A
1 2
A
The part divided with TRACK DIVIDE
becomes one "track".
If it is required to erase only the first or second half of a track,
only one TRACK DIVIDE operation is enough.
1 2
A
Execute TRACK ERASE
once.
1 2
A
The space left after erasing is filled by sub-
sequent tracks which move along.
MD edit functions
XD-9580MD (En)
3
D
Part to be erased
3
B C
Execute TRACK
DIVIDE twice.
3 4 5
B C
TRACK DIVIDE
Part to be erased
3 4 5
B C
Track No. is
adjusted.
3 4
B C
TRACK ERASE
6 5
P
‰