USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V SPECIFICATIONS JEFTIGPU200-230 Input Voltage 230V ~ 50Hz Input Current TIG 35.4A • MMA 39.5A Input Power TIG 5.2kW • MMA 6.4kW Power Factor 0.68 Maximum No Load Voltage...
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V SAFETY GUIDELINES Please read and ensure that you understand all of the operating instructions, safety precautions and warnings in this Instruction Manual before operating or maintaining this equipment. Most accidents that result from equipment operation and maintenance are caused by the failure to observe basic safety rules or precautions.
Page 7
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V EQUIPMENT SAFETY General Safety Operation and maintenance of this equipment can be dangerous and harmful to your health. It is important that you read these instructions carefully and follow all safety procedures listed.
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V OPERATION GUIDE - EQUIPMENT LAYOUT FRONT VIEW REAR VIEW DIGITAL CONTROL DIGITAL CONTROL ~ ~ 1 ~ 220V 1 ~ 220V ~ ~ AC frequency...
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V OPERATION GUIDE - CONTROL PANEL Description AC / DC Selection Button Welding Mode Selection (TIG / MMA) Gas Test Button High Frequency Ignition Button Pulse Button...
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V OPERATION GUIDE - AJUSTMENT DIAL SETTINGS Available parameters where 2T and 4T mode have been selected: Description Tpr: Gas pre-flow time Unit: S Setting range: 0.1—1 Factory setting: 0.3...
Page 11
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V Available parameters where 2T and 4T mode have been selected: Description Ib: Base current Unit: A Setting Range: 5—200A • (DC) 10—200A (AC) Important! Only selectable when “Pulse Button” has been pressed.
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V WORKING ENVIRONMENT This equipment is designed for use in the following conditions: Areas free from moisture and dust with an ambient temperature between 0° to 40°C •...
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V TROUBLESHOOTING Welding quality is dependant on the selection of the of the correct consumables for the job at hand, maintenance of the equipment, proper preparation and the correct welding techniques. The following troubleshooting guide will help you to identify some of the most common problems you might encounter and the best steps to prevent or overcome them.
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V ENVIRONMENTAL PROTECTION Recycle any packaging and unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V EC DECLARATION OF CONFORMITY We, Tundra Industrial, as the authorised European Community representative of the manufacturer, declare that the following equipment conforms to the requirements of the following Directives:...
3 months after the initial sale to the distributor. 1 Year • JEFTIGPU200-230 • 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V 90 Days • All replacement parts purchased outside of the warranty period Important: All parts used in the repair or replacement of warranty covered equipment will be subject to a minimum of 90 days cover or the remaining duration of the warranty period from the original date of purchase.
Page 19
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V Claiming Warranty Coverage The end user must contact Jefferson Professional Tools & Equipment (Tel: +44 (0) 1244 646 048) or their nearest authorised Jefferson dealer where final determination of the warranty coverage can be ascertained.
USER MANUAL JEFTIGPU200-230 200 AMP HIGH FREQUENCY • PULSE • AC/DC TIG WELDER • 230V IMPORTANT! SAFETY FIRST! Before attempting to use this product please read all the safety precautions and operating instructions outlined in this manual to reduce the risk of fire, electric shock or personal injury.