Advertisement
Figure 2. Raising and Lowering of Seesaw Columns
1. Fasten length of 12mm rope to
the rope hook and secure.
4. Complete operation, avoiding jerks, which may
be detrimental to the luminaires as well as to
the column.
Disclaimer The instructions included in this document have been written to provide guidance only for the assembly of the equipment therein described. Industrial Galvanizers
Corporation Pty Ltd is not liable for any direct, indirect or consequential loss or damage to property or personal injury that may arise in tort, equity or otherwise at
law as a result of following these instructions. | Copyright © 2013 Industrial Galvanizers Corporation Pty Ltd, trading as INGAL EPS.
seesaw pole Operation
2. Remove allen keyed apron
securing bolt.
45º minimum
5. Raising of the lowered column is the reverse
procedure, as described. securely re-install
the allen keyed apron securing bolt on
completion of raising operation.
For more information please contact INGAL EPS:
Tel 1800 623 302 | Email sales@ingaleps.com.au
3. pull apron away from stub
section allowing the top section
to gently swing downwards.
or visit www.ingaleps.com.au
Advertisement
