Download Print this page

Havit H1118 Quick Start Manual

Advertisement

Quick Links

SPECIAL NOTE: To ensure the device is fully functional, please connect the device using the App directly instead of using the system Bluetooth
setting. To do it, simply tap on the top right corner on the App home page to search for your device, and then tap on the Bluetooth ID to start
connecting. If you have used the phone Bluetooth to connect with the watch which is not the correct way, please disconnect the device from the
phone Bluetooth setting and try connecting the device using our APP directly. Besides, please make sure you have made the necessary settings
(check Settings->FAQ on our App) to allow the App to run in the background without having killed by the phone system. Once the App is killed by
the system, the connection will be lost and no notifications will be pushed to the device.
PACKAGE CONTAINS
Smart Band x 1
USB Charging Cable x 1
User manual x 1
HOW TO TURN ON
Press and hold the Button for 3-5 seconds to turn on the device.
***If it is not turned on, it is likely that the battery is flat, please charge the device first***
HOW TO CHARGE THE DEVICE
Insert the USB end of your charging cable into the power output (5±0.25V adapter), and put the other end (with charging pins) close to the
Magnetic Charging Points at the bottom case of the device. If the charging pins on the cable and the charging points on the device are matched in
the correct direction, both should stick together by the magnet and the charging will start. If there is a repelling force, please reverse the direction
and try again.
ABOUT THE DEVICE
Home Screen
It comes with 7 clock faces which can be changed by press and hold on the touch key. It also supports auto changing everyday and "shake to
change" mode which can be enabled in the settings.
Sports Menu
Press and hold on the touch button to enter the Sports Menu loop. Within the Sports Menu loop, press on the touch button to jump to the next
sport mode, while press and hold to start the corresponding sports session. Once started a sport session, press and hold touch button to exit
Press on the touch button to jump to the next page.
For Walking, Running, Hiking and Cycling, you can initiate the workout session from the GPS page on the App while the device is connected, and
the track will be recorded on the map. Please note the GPS accuracy is depending on the GPS location service from your phone, and it doesn't
rely on the device at all.
Heart Rate

Advertisement

loading

Summary of Contents for Havit H1118

  • Page 1 SPECIAL NOTE: To ensure the device is fully functional, please connect the device using the App directly instead of using the system Bluetooth setting. To do it, simply tap on the top right corner on the App home page to search for your device, and then tap on the Bluetooth ID to start connecting.
  • Page 2 This page shows the heart rate measured last time, and will start measure again automatically after 2 seconds. The new result will be ready and displayed on the screen in about 20seconds Press on the touch button to jump to the next page. ***Please keep the Heart Rate Sensor clean and have good contact with your wrist;...
  • Page 3 Settings Menu Press and hold on the touch button to enter the Settings Menu loop. Within the Settings Menu loop, there are device info, do not disturb setting, restore to factory setting and power off. Press on the touch button to jump to the next option, while (if there’s a small yellow arrow on screen) press and hold to enter the corresponding function as below: Device Info Page: Showing the Bluetooth user friendly name and the firmware version number.
  • Page 4: Fcc Statement

    ABOUT THE MOBILE APPLICATION (the “App”) Download the CT FIT app from App store for iPhones and from Google Play Store for Android phones. ***To allow the App to function correctly, please grant the permissions for all the access which your system will prompt you during the installation.
  • Page 5 to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 6 The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2AI6I-H1118...