Table of Contents
Advertisement
HDD format
HDD
Initializes the HDD.
Normally it is not required to initialize the HDD. However
when the HDD does not function correctly, initializing the
HDD may solve the situation. If you initialize the HDD, all
titles and library information stored in the HDD are
permanently deleted.
e.g.
HDD Format
Entire disc contents including
library will be erased
if disc is formatted. Proceed?
Start
Format
1) Press
/
buttons to select "Start", then
press ENTER button.
2) Confirm the message, press
select "Start", and then press ENTER
button.
Initialization of the HDD starts.
If you want to cancel the initializing, select
"Cancel".
DVD-RAM physical format
DVD-RAM
See
page 35.
DVD Drive speed setting
HDD
DVD-RAM
DVD-RW
DVD-R
To reduce the mechanical noise during High speed
dubbing (
page 100 – 105).
High speed:
Usual mode.
Low speed:
The dubbing speed is lowered to reduce the
mechanical noise.
Cancel
0
%
/
buttons to
Initial settings
Language
To set a preferred language for on-screen displays.
English:
To view on-screen display in English.
French:
To view on-screen display in French.
Time & Date setting
To set the clock manually if it is not set correctly.
1) Press
/
and ADJUST (
clock.
/
buttons:
To select "Year", "Date", "Time", or "am/pm".
ADJUST (
/
) buttons:
To change the date.
( /
buttons can also be used in addition to
ADJUST (
/
) buttons.)
2) After setting all the items, press ENTER.
3) Press
/
to select "Yes", then press
ENTER.
Note
• If the clock is set with TV Guide On Screen
not available.
Guide and Clock reset
To correct the clock of the recorder.
This option includes the TV Guide On Screen
process, followed by power off of the recorder. Refer to
the guidance to operate.
/
) to set the
®
, this setting is
®
resetting
187
Advertisement
Table of Contents
