Toshiba DR430KU Owner's Manual page 94

Symptom
Playback
The disc does not start playback
from the beginning.
The unit starts playing back the
disc automatically.
Some functions such as stop,
search, or slow-motion playback
cannot be performed.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed or turned off.
The angles cannot be changed.
Recording / Timer recording / Editing
External input position (L1/L2)
cannot be changed while
recording.
Nothing was recorded even
though you set the timer setting
correctly.
Recording does not stop
immediately after you press
[STOP C].
Timer recording is not complete
or did not start from the
beginning.
DV
DV signal cannot be input.
The DVC cannot be operated
with this unit.
Certain functions of the unit
cannot operate.
DV audio signal cannot be
switched.
94 EN EN
E7PEAUD_DR430KU_EN.indd 94 E7PEAUD_DR430KU_EN.indd 94
TROUBLESHOOTING
• Resume playback was activated (page 54). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
• The DVD-video features an auto playback function.
• Depending on the disc, you may not be able to do some of the operations.
Refer to the instruction manual supplied with the disc.
• The titles does not have the multilingual audio tracks.
• The DVD-video prohibits the changing of the language for the sound track.
• Multilingual subtitle are not recorded on the DVD-video.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc contains
a multi-angle portion. Actual change will be performed when the portion has
come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video's menu.
• This unit is designed so. This is not a malfunction.
• There was a power failure during recording.
• The unit's internal clock stopped due to a power failure that lasted for more
than 30 seconds. Reset the clock (page 25).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
• It will take a few seconds for the unit to input disc data before recording
stops.
• The timer setting overlapped with another setting that has priority (page 41).
• Disc space was not enough.
• "Make Recording Compatible" is not set to "ON", when recording onto
DVD+RW/+R that was recorded on other unit.
• Before connection, turn on the power supplies for both this unit and the DVC,
and make sure that these units are in stop mode.
• Only a "DVC-SD" signal can be input from the DVC to this unit. Other types of
signals are not supported.
• Do not connect any device other than the DVC. Even if a recorder or PC with
another DV terminal is connected, the DV function will not operate.
• If the DVC is not recognized after connection, turn off the power supply for
the unit and re-connect the DVC.
• Signal input or DVC operation from this unit may be disabled depending on
the type of DVC.
• If a DVC signal cannot be input, use an external input (L1 (Rear)/L2 (Front)) for
analog connection via audio/video cables.
• DVC control may be disabled depending on the type of DVC, even in a mode
other than camera mode. In this case, switch to DVD control and execute the
normal recording procedure while operating the DVC.
• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow playback
function is disabled.
• With L3 (DV-IN), the disc display menu does not appear unless disc playback
is executed.
• For recording with the DVC, the recording audio signal can be set to 12 bits
or 16 bits. However, when 16-bit recording mode is selected, audio signal
cannot be switched. To record an audio signal, set it to 12 bits.
Remedy
2009/12/14 18:34:11 2009/12/14 18:34:11