Toshiba D-R550KU Owner's Manual page 103

D-r550ku user's guide
Table of Contents

Advertisement

Video (cont'd)
1
Progressive (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [ENTER].
General Setting
Playback
Display
Video
Progressive
Recording
ON
Clock
OFF
Channel
DivX
HDMI
Reset All
2) Use [{ / B] to select "Yes", then press [ENTER].
General Setting
Playback
Activating progressive scan:
Display
Check your TV has progressive scan
Video
Progressive
and connect with component video cable.
Rcording
ON
Clock
OFF
Channel
NOTE :
DivX
If there is no picture or picture is
HDMI
distorted after selecting
Reset All
Wait about 15 seconds for auto recovery.
Activate?
3) Use [K / L] to select "Yes" within 15 seconds, then
press [ENTER].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (480p),
you are recommended to use the HDMI or component
video cable (commercially available) to connect this
unit to the TV. (Refer to "Method 3" on page 21 or
page 22.) If not, use the RCA video cable and set the
progressive scan to "OFF" or press and hold [SETUP]
for more than 3 seconds during DVD playback.
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
E7H70UD_EN.indb 103
E7H70UD_EN.indb 103
GENERAL SETTING
Progressive
TV Aspect
Select Video
Progressive
TV Aspect
Select Video
"Yes",
Yes
No
2
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press
[ENTER].
General Setting
Playback
Display
Progressive
Video
TV Aspect
TV Aspect
Recording
Select Video
4:3 Letter Box
Clock
4:3 Pan & Scan
Channel
16:9 Wide
DivX
HDMI
Reset All
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
EN
EN 103
103
2007/02/26 18:12:26
2007/02/26 18:12:26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-r550

Table of Contents