Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Clean Air CAP18
- Page 1 OPERATION & MAINTINENCE INSTRUCTIONS FOR CAP18 Pass Thru Air Lock Cleanroom Entry System Engineering Solutions with Value and Integrity 8605 Wyoming Avenue N. • Minneapolis, MN 55445 763-425-9122 • 800-423-9728 • Fax: 763-425-2004 E-Mail: sales@cleanairproducts.com www.cleanairproducts.com...
-
Page 2: Table Of Contents
OPERATION & MAINTINENCE INSTRUCTIONS CAP18 Pass Thru Air Lock Cleanroom Entry System Table of Contents Safety Warnings Installation Wall Mounted Pass Thru Installation Floor Mounted Pass Thru Installation Fire Rated Pass Thru Installation Operation & Maintenance Interlock Operation HEPA Filter Operation... -
Page 3: Safety Warnings
OPERATION & MAINTINENCE INSTRUCTIONS CAP18 Pass Thru Air Lock Cleanroom Entry System Safety Warnings Never expose the assembly to moisture or rain. If the unit gets wet, disconnect the power at the source and have an authorized service inspection before using it again. -
Page 4: Wall Mounted Pass Thru Installation
OPERATION & MAINTINENCE INSTRUCTIONS CAP18 Pass Thru Air Lock Cleanroom Entry System Standard Wall Mounted Pass Thru Installation Before installation locate all mounting frames and mounting frame hardware. The “notched” frame pieces attach to the vertical sides of the pass thru. Wall mounted pass thrus featuring universal mounting frames can be installed in a variety of configurations as outlined below. -
Page 5: Floor Mounted Pass Thru Installation
OPERATION & MAINTINENCE INSTRUCTIONS CAP18 Pass Thru Air Lock Cleanroom Entry System Floor Mounted Pass Thru Installation Before installation locate all mounting frames, mounting frame hardware, and shipping braces. The “notched” frame pieces attach to the top of the pass thru. Floor mounted pass thrus featuring universal mounting frames can be installed in a variety of configurations as outlined below. - Page 6 Floor Mounted Pass Thru Installation (Continued) Anchoring to Floor (Optional) To anchor a non-fully welded pass thru to the floor, drill though the 7/16” holes within the Clean Air Products does not provide pass thru wall cavity into the floor for anchor bolts. anchoring hardware.
-
Page 7: Fire Rated Pass Thru Installation
OPERATION & MAINTINENCE INSTRUCTIONS CAP18 Pass Thru Air Lock Cleanroom Entry System Fire Rated Pass Thru Installation Most fire rated pass thrus come with pre-installed universal anchoring brackets welded into the frame throat as shown. These can be anchored to a variety of wall types. Below are the most common installation methods. -
Page 8: Operation & Maintenance
OPERATION & MAINTINENCE INSTRUCTIONS CAP18 Pass Thru Air Lock Cleanroom Entry System Operation & Maintenance After installation the pass thru should be checked for proper function. Door latches and interlock components should be aligned and operate smoothly. Interlock Operation Pass thru interlocks prevent both doors from being open at the same time. When one door opens the opposite side is locked. -
Page 9: Maintenance
OPERATION & MAINTINENCE INSTRUCTIONS CAP18 Pass Thru Air Lock Cleanroom Entry System Maintenance At least once a day wipe down interior surfaces and knobs. Contaminate can get into the pass thru while the dirty side door is open. Particles can float into the pass thru and settle on the interior. -
Page 10: Warranty Information
EPA or other regulatory agencies. These parts are not to be shipped back to Clean Air Products’ factory. The purchaser shall be responsible for proper disposal and all costs associated with the disposal and/or storage of the defective contaminated equipment.
Need help?
Do you have a question about the CAP18 and is the answer not in the manual?
Questions and answers