Battery Warranties; Vexilar Lithium Warranty; Digital Depth Indicator - VEXILAR FL Series Owner's Manual

BATTE RY WAR RA NT I E S
Pro-Rated SLA Battery Warranty
The battery warranty is covered under a pro-rated
performance guarantee. Failure to properly care for
battery is not the responsibility of Vexilar. Here are the
details of the battery coverage from Date of Purchase
(Proof of purchase will be required):
• Less than 30 days from purchase date – Full
replacement
• Less than six months and greater than 30 days – $12.00
• Greater than six months and less than one year –
$20.00
• Over one year and less than two years – $25.00
• Over two years – No warranty – New purchase price.

Vexilar Lithium Warranty

Vexilar Lithium batteries have a full replacement warranty,
two years from date of purchase. The battery must not have been submerged, damaged or improperly charged.
All costs do not include shipping
68
Flasher-Family-Manual-2020.indd 68-69 Flasher-Family-Manual-2020.indd 68-69
D D- 1 00 D IG I TA L D EP TH I N D ICATOR
The DD-100 is Vexilar's first smart digital indicator display that offers both digital depth and a battery indicator
when you push the "push to test button." The DD-100 will work on all Vexilar FL/FLX series of flashers,
including older Hondex, Si-tex and Micronar FL-8® models. Vexilar's new DD-100 gives anglers what they have
been asking for, "Digital Depth!"
The digital depth display will always give you a depth reading as long as your Vexilar FL flasher is turned on and
the transducer is in the water. The digital depth portion of the indicator will work even if you're not in the correct
depth range. This will allow you to get your flasher in the best depth range possible. If your display is blinking
or the depth numbers are going up or down rapidly, it could be that you're over a huge school of fish or baitfish
OR the bottom is irregular.
The DD-100 was designed to fit in place of the popular D-130 or T-130 battery indicators which Vexilar has been
selling for years. You can easily outfit your Pro Pack, Ultra Pack or Genz Pack with the DD-100. The DD-100 not only gives you digital depth,
but also gives you the battery status of an SLA battery by pressing a button.
The only time you will see a battery status is when you push the "push to test button." The SLA battery status is given in percentages of voltage
remaining in the battery. For example, if you push the "push to test button," and it reads 70%, that means your SLA type battery is at 12.2 volts,
100% = 12.7 volts and 0%=11.0 volts.
Current draw: 124uA (micro amps) when off and 21mA (milliamperes) when on.
Note: This is not a charge indicator. It will give only current status of an SLA battery's voltage.
Note: Flasher must be in Normal Power Mode (not LP Mode or while using an S-Cable) to get a reliable bottoms signal.
(Not compatible with Vexilar Lithium batteries)
69
5/20/20 2:16 PM 5/20/20 2:16 PM