Advertisement
4. MAINTENANCE
WARNING! Be sure to disconnect the lamp from the mains power supply before carrying out any maintenance.
4.1.
Keep the lamp clean.
4.1.1. check cable for any signs of wear. If the plug and/or cable are worn/broken, remove the lamp from service immediately and have it
repaired by a qualified electrician.
4.2.
To Replace Fluorescent Tube
4.2.1. unplug from the mains supply.
4.2.2. study fig.5, twist the upper end cap right and pull off.
4.2.3. Grip the loop at the top of the tube assembly and pull it out of the lamp guard (fig.6).
4.2.4. remove the fluorescent tube by turning it approx. 45° until the pins are visible and gently lift tube away from contacts, replace the
bulb and turn 45° to lock into place, then slot the tube assembly back into the guard making sure to align the groves in the guard with the
lamp assembly.
NOTE: Use caution when handling a fluorescent tube and dispose of in accordance with local authority guidelines.
4.2.5. to re-assemble, reverse the dismantling procedure, taking care not to force or twist tube or starter assembly.
fig.2
fig.4
fig.5
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk,
IP32 7Ar
Original Language Version
fig.3
01284 757500
01284 703534
email
fig.6
www.sealey.co.uk
Web
sales@sealey.co.uk
Ml30 Issue: 4 - 13/04/10
Advertisement
