How do i connect my wireless headset with the remote handset lifter (rhl) to my standard desk phone so i have remote call control using my headset (2 pages)
How do i connect my wireless headset with the remote handset lifter (rhl) to my standard desk phone so i have remote call control using my headset (2 pages)
Page 1
5. Mount the GN1000 RHL onto the handset cradle of the desk phone using the provided adhesive. 6. Rest the desk phone handset on the GN1000 RHL arm and ensure that it presses the desk phone hook switch. /supportpages/jabra-gn1000/01-0369/faq/7e8d249a-a425-4d8b-8dd6-895e050b93f7...
Page 2
07/04/2021 14:37 Configuration: 1. Follow the setup instructions for your Jabra wireless headset. If the headset base requires manual configuration, set the Electronic Hook Switch setting to "RHL" and set the dial tone switch to position “A”. 2. Make a call to the headset. If the volume of your voice is too loud or quiet to the person you are calling, adjust the headset microphone volume until you achieve the optimum level.