Page 3
Unpacking the Solo Table for use The Solo Table will arrive with the legs folded away – this is to ensure that it arrives undamaged. The first stage of unpacking is to loosen the lever handle as shown and tilt the table top upwards.
Page 4
Using the Solo Table. The Castors should be locked while in use to maintain stability To set the table to the desired height and angle, the lever handle is released as shown The table top is then positioned and re-secured...
Page 5
The Solo Table can be used at a variety heights and angles, simply by loosening the lever handle.
Page 6
Only genuine parts should be used when your Solo table is repaired. Regular lubrication of moving parts will extend the life of your Solo table and will make adjusting parts easier. Use a spray lubricant and wipe off any excess spray.
Need help?
Do you have a question about the Solo and is the answer not in the manual?
Questions and answers