Orion Sync User Manual

SUPPORT
E-mail
support@orionlabs.io
Phone
1-866-855-4249
HELPFUL LINKS
Online Knowledge-base
support.orionlabs.io
Orion Command Center
login.orionlabs.io
View PDF Online
orionlabs.io/sync-guide
Order Orion Sync Accessories
orionlabs.io/shop/orion-sync
Health / Safety Warnings
Exposure to Radio Frequency
This is an IOT Device as M2M exception. This device complies
with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
For more information, please visit support.orionlabs.io/orion-
sync/warnings
Maintaining dust/water resistance
Orion Sync is dust/splashproof from any direction to IP54
standards. Orion Sync is resistant to dust and splashes only when
the battery pack is installed. Change the battery pack only when
Orion Sync is dry.
To maintain the device's water and dust resistance, insert only
standard micro USB and 3.5mm audio connectors into the
appropriate ports when Orion Sync is clean and dry. Do not
insert foreign objects into any part of Orion Sync, including the
microphone and speaker ports.
The included charger is not waterproof. Do not expose to rain or
snow. Charge Orion Sync only in a dry location.
Medical Device Interactions
Orion Sync contains components and radios that emit
electromagnetic fields. These electromagnetic fields may
interfere with defibrillators, pacemakers, or other medical
devices. Persons with active implantable medical devices (AIMD)
should:
Consult with their physicians regarding the potential risk of
interference from radio frequency transmitters, such as cell
phones.
Turn Orion Sync off immediately if there is any reason to suspect
that interference is taking place.
Maintain a safe distance between Orion Sync and the
implantation site. Carry or use Orion Sync on the opposite side of
their body from the implantable device to minimize the potential
for interference.
Operation in RF-Sensitive Environments
Orion Sync is not intended for operation in RF-sensitive
environments. Turn off Orion Sync before entering aircraft,
areas with potentially explosive atmosphere, certain healthcare
facilities, and other RF-sensitive environments. Observe signs and
notices that prohibit or restrict the use of electronic devices.
Do Not Disassemble
Do not disassemble or attempt to repair Orion Sync. Doing so
will void the manufacturer's warranty and may result in damage
to the device or personal injury. If you suspect your device isn't
performing as intended or needs repair, please contact Orion
support at support@orionlabs.io
Lithium-ion Battery
This device contains a lithium-ion battery which may catch fire or
explode if damaged or punctured. Do not disassemble, puncture,
crush, incinerate, or short-circuit device or battery pack. For your
safety, never handle a damaged or leaking battery pack
Disposal Info
DO NOT THROW IN TRASH - RECYCLE WITH E-WASTE
Do not dispose of Orion Sync or battery packs with household
trash. Device and battery pack should be disposed of properly
according to local laws and regulations regarding electronic
waste and lithium-ion batteries. For more information, contact
your local waste disposal authority.
Orion
Sync
OLED
Display
Mics
Speaker
Navigation
PTT
Button
USER GUIDE
orionlabs.io/sync-guide
Select
Previous
Next
Cancel