Table of contents Introduction. Rogers. over seventy years of excellence Unpacking. Installation. Caring for your loudspeakers. Technical specifications. Warranty.
Please take some time to read the manual to ensure that your speakers perform at their best. Rogers over seventy years of excellence. For over seventy years the name of Rogers has earned the high regard of music lovers worldwide with the high standard of musical integrity it’s products have consistently achieved.
significant advance in moving coil loudspeaker performance. This was followed four years later by another BBC licensed design, the legendary LS3/5a. Undoubtedly one of the all-time greats in loudspeaker design it has inspired more interest and critical acclaim than almost any other product.
Page 5
placing on high mass loaded stand in free space can offer an increase in perceived space and depth of playback material. Note: the connections on the back of the speaker are single wire with 4mm banana sockets. The correct frequency response ( tonal balance ) is achieved with the grilles in place.
Longer cable runs will generally require heavier gauge cables. All system connections should be clean and tight. Periodically cleaning of all signal path connections in your system is recommended. Simply breaking and re- making each connection ensuring a positive contact is all that is needed.
Technical Specifications. Classic LS3/5a 15 Ohm Monitor Speaker System Type: Two way infinite baffle ( closed box) Frequency Response: 70Hz – 20KHz +/- 3dB Bass/Midrange Driver: 138mm polymer cone Tweeter: 19mm mylar dome Crossover Frequency: 3KHz Sensitivity: 83dB for 2.83V at 1M...
Page 8
Finish: Selected real wood veneers Recommended placement: On rigid mass loaded stands. 200mm from rear wall, clear of side walls, angled in so axis cross just in front of the listener. Dimensions: 188 x 304 x 164 ( W x H x D ) Weight: 5.12Kg each speaker.
Rogers UK warrants this product to be free from defects in materials and workmanship for two years from the original date of purchase from an appointed Rogers UK dealer, and agrees to covers the cost of parts and associated labour required to correct such defects, subject to terms &...
Need help?
Do you have a question about the Classic LS3/5a 15 Ohm and is the answer not in the manual?
Questions and answers