Advertisement
Solar Charge Regulator
MODELS: LL-REG-12v-5A-PB
Connecting
1.
Connect controller to battery
2.
Connect controller to solar panel
NOTE:
Order of connection is not important. System will automatically correct itself.
Expose Solar Panel to Light & Dark to confirm system is working correctly. Check that the
GREEN LED turns on when solar panel is exposed to sunlight.
PRE-CHECK #1:
Connect Regulator to Solar panel to confirm Charging Status LED Turns
On (Battery is NOT yet connected)
PRE-CHECK #1:
Connect Regulator to Battery to confirm Battery Status LED Turns On.
(Solar Panel NOT Connected)
NOTE:
If both Pre-Checks are OK Regulator is functioning correctly unless the Battery
Status LED is constantly blinking slow-green: if this persist regulator is damaged.
Mounting
1.
Use necessary hardware to mount controller
2.
Controller should be mounted near battery or inside battery box.
Troubleshooting & Wiring Diagrams for DC Boat Lift Systems
For more information & wiring diagrams for installation on DC boat lift
systems please visit:
Or download PDF wiring diagram:
Lake Lite Inc.
105 W Simon St
Laotto, IN 46763
http://lakelite.com/wirediagrams.html
http://lakelite.com/wirediagrams.pdf
Phone: 260-918-2758
Fax:
260-918-3540
E-mail sales@lakelite.com
www.lakelite.com
Advertisement
