Advanced Playback; Zooming; Locating Desired Scene - Toshiba MD14F11 Owner's Manual

Advanced playback

Zooming/Locating desired scene
DVD

Zooming

VCD
CD
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM
(x 2.0).
2
/ / /
Press to view a different part of the
frame.
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
3
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view (
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
5S00201A [E] (P28-31)
1 (x 1.3), 2 (x 1.5) and 3
1
Off).
31
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to play back. In the case of VCD/CD
discs, time and track are used to locate the desired point to
play back.
To check the title, chapter and time, press DISPLAY.
1 Press JUMP during playback or stop mode.
Time
Title
Chapter
• "Time" only works in playback or
resume stop mode.
2
Press or to select the "Time", "Title" or
"Chapter".
Time
Title
Chapter
3 Press Number buttons (0–9) to change the
number.
Time
Title
Chapter
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4 Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the JUMP does not
work. To turn off PBC, see page
4/1/05, 3:17 PM
DISPLAY
0–9
JUMP
ZOOM
/ / /
CANCEL
ENTER
/
/6
/
/Enter/0 9/Cancel/Jump
/
/6
/
/Enter/0 9/Cancel/Jump
/
/6
12
/
/Enter/0 9/Cancel/Jump
.
37
31