Advertisement
Quick Links
Small Sand Filter
Item #5216
INSTALLATION, OPERATION & PARTS
▲WARNING
This equipment must be installed and serviced by a qualified technician in accordance with all applicable codes
and ordinances. Improper installation can create hazards which could result in property damage, serious injury
or death. Improper installation will void the warranty. The NOTICE label indicates special instructions that are
important but not related to hazards.
Notice to Installer
This manual contains important information about the installation, operation and safe use of this product. Once
installation is complete, this manual must be given to the owner / operator of this equipment.
6950 51st Street Kenosha WI 53144 | Orders and Customer Care: 1-800-574-7665 | Fax: 1-800-323-5932 | Doheny.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Doheny's 5216
Summary of Contents for Doheny's 5216
- Page 1 Small Sand Filter Item #5216 INSTALLATION, OPERATION & PARTS ▲WARNING This equipment must be installed and serviced by a qualified technician in accordance with all applicable codes and ordinances. Improper installation can create hazards which could result in property damage, serious injury or death.
- Page 2 CHAPTER 1 CHAPTER 3 : INSTALLATION INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1. Mount the pump to Sand Filter Support by using READ AND FOLLOW ALL INSTRUCTIONS the nuts and bolts. 1. The sand filters are designed to work with water temperature between 32ºF and 113ºF. The Pump filter should never be operated outside of these Sand Filter...
-
Page 3: Chapter 3 : Multi-Port Valve Operation
5. Remove the Stand Pipe Blocker and clean the 5. Connect all plumbing to the Multi-Port Valve taking Sand Tank neck carefully. care that all joints are glued or tightened securely to prevent leaking. 6. To prevent breakage and damage to the pump and Multi-Port Valve, use only pipe sealants specifically formulated for plastics. -
Page 4: Chapter 4 : Initial Startup Of Filter
CHAPTER 4 5. Switch off the Pump. Close the Inlet Valve, set the : INITIAL STARTUP OF FILTER Multi-Port Valve to the FILTER position and Switch Recheck that all the connections have been made on the Pump. Open the Inlet. Your filter is now and are secure, and that the filter media was added operating in the normal filter mode. - Page 5 Above Ground Sand Filter Item # 5216 PART DESCRIPTION NUMBER REQ’D 647303071001 4-Way Multi-Port Valve 647303073 Flange Clamp 65431041080 O-Ring 647303013931 Filter Tank 647303074 Filter Assembly with Stand Pipe 647304073 Drain Plug 647303012 Sand Filter Support 647201273 Screw M6X25 and Nut M6...
Need help?
Do you have a question about the 5216 and is the answer not in the manual?
Questions and answers
how to prime the pump. ? was working correctly then now not sending water through.